XYZprinting ABS Plastic Filament Cartridge, 1.75 mm Diameter, 600g, Yellow

The XYZPrinting ABS filament is a 600g cartridge of 1.75-mm diameter yellow filament for use with the XYZPrinting daVinci 1.0 3D printer (sold separately). Acrylonitrile butadiene styrene (ABS) is a strong thermoplastic that can be surface treated with sandpaper or acetone after printing. It is commonly used with a heated bed set to around 80 degrees C (176 degrees F) to prevent warping during the printing process and facilitate removal. The print temperature ranges from 215 to 250 degrees C (419 to 482 degrees F).

XYZprinting manufactures 3D printers. Founded in 2013, this international company has its US headquarters in San Diego, CA.


Read More

IC3D 120mm (4.7″) Wide 10M Long Kapton (Polyimide) Tape for 3D Printer platforms

This is a 120mm (4.7″) wide by 22M long roll of Kapton tape (Polyimide). Enough to cover about 50 8×8″ glass sheets. We prefer this size since it’s easier to apply than full width sheets. Printing over heated Kapton taped glass allows for excellent adhesion of melted plastic and gives the bottom of your print a nice smooth finish. After many hours of printing, refresh your printing surface with this stuff. This tape can handle temperatures of up to about 280C. We’ve tested tape from several different manufacturers and chose the best. *** APPLICATION TIP: To minimize the seam from laying to sides down, just spray some lightly soaped water onto the glass and tape. Lay the first side down, slide to position, then squeegee the water out.


Read More

Generic Reprap 12v 40W Ceramic Cartridge Wire Heater For Arduino 3D Printer of 5pcs

Voltage: 12v
Power: 40w
Material: Stainless Steel
Diameter: 6mm
Length: 20mm
Wire Length :1m
Shipping Included:
5PCS*Cartridge Heater

Product Features

  • Voltage: 12v
  • Power: 40w
  • Material: Stainless Steel
  • Diameter: 6mm
  • Length: 20mm

Click Here For More Information

Cube 3 – Personal 3D Printer – By 3D Systems

The third generation CubeĀ® 3D printer offers a new, compact design, dual color printing, a choice of 23 print colors in ABS and PLA plastics, touch-screen controls, printing direct from your mobile device and print speeds 2 times faster than other printers.

With a build size of up to 6 x 6 x 6 inches (152 x 152 x 152 mm), the Cube offers easy-to-use software on both Windows and Mac platforms that quickly processes your 3D model for its best build result and sends it wirelessly to your Cube printer for immediate printing.

This incredibly easy-to-use 3D printer is certified safe for home use, meets IEC Home Printer Certification 60953 (TUV) and is recommended for children (and adults) aged 8+. Wireless connectivity, insta-load materials cartridges, preloaded filament jets and auto-leveling of the print pad makes for an effortless and satisfying 3D printing experience every time.

Product Features

  • Dual Extruder: Print 2 materials and/or colors, 70 & 200 um thin
  • Auto Calibration
  • 6″ square print volume
  • Kid Safe – TUV certified
  • WiFi & mobile printing enabled

Detailed Information available on our Homepage…