IC3D 3mm PLA 3D Printer Filament 2lb Black – MADE IN USA

IC3D® – For 3D Printers, By 3D Printers (TM) Spend more time printing with high-quality 3D printer filament from IC3D®. IC3D® extrudes 3D printer filament in-house in Ohio, USA. Strict production standards for cleanliness and tolerance specifications ensure the diameter is within +/- 0.10mm and ovality (roundness) is within 4%. Quality is the top priority as each spool is hand checked, vacuum sealed with desiccant, and packaged. IC3D® filament is extensively tested with success on a variety of mainstream desktop 3D printers utilizing various extruder designs and hot-end styles. Every spool of IC3D® filament is backed by a 100% SATISFACTION GUARANTEE.

Product Features

  • 2lb of 3mm PLA 3D printer filament
  • Filament diameter is 2.90mm +/-0.10, ovality (roundness) is within 4% and weight is 2.1lb +/- 0.1
  • Printing temperature range is 190 – 200C
  • Made in the USA under strict quality standards
  • Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A

Check Out Our Website For Details…

PLA Gold Filament 1.75mm, 1kg / 2.2lb Printing Material Supply Spool for 3D Printer

These 3D Filament roll in a spool wheel comes in many various colors and in different materials (ie such as ABS or PLA, etc). This is a durable material designed for strong, resilient parts. When printed, this 1.75 mm high temperature filament diameter will look good and have slightly more texture than standard filament.

PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Unlike ABS, PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.

Compatible with Flashforge, RepRap, Makerbot, UP!, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC, and more!

Product Features

  • Diameter of the filament: 1.75mm; Weight of the Filament spool: 1KG/2.2lbs
  • Printing at user control melting temperature at between 160 – 180 C
  • Easy to use and performs well on most prints
  • High Product Precision: Filament extrudes precisely for excellent printing and consistent layering.
  • Spool of the Filament are in a sealed package

Check Out Our Website For Details…

Voltivo ExcelFil Ash Grey PLA 1.75mm 3D Printing Filament (1kg/2.2lbs spool)

Voltivo ExcelFil is a high grade, high density 3D printing filament available in both PLA and ABS perfectly suited for and tested with a wide range of 3D printers. It allows for easy extrusion due to its tight laser-controlled tolerances, smooth flow characteristics over a large temperature range, rapid cooling and a high tensile strenght.

ExcelFil comes in a large range of colors and in two diameters to fit most printers available. We ship ExcelFil on sturdy recycleable spools, vacuum sealed with a desiccant bag to ensure it arrives moisture free. Unlike other vendors, we provide full support information on our filaments on our ExcelFil Support Site.

Filament characterization

We in average spend 2 weeks to test and characterize each new material, diameter and color combination in many different semi-automated tests. Above and beyond the manufacturing quality control, we re-run these tests on a quarterly basis to ensure we always ship a product that provides reliable and repeatable print results while using ExcelFil

Filament Print Support Database

Creating successful prints greatly depends on the correct print settings. 3D printing still unfortunately is not as straight forward as desktop printing. The combination of material, the color, the 3D model, the slicing software and the printer hardware used all greatly influence successful print results. Based on the characterisation tests outlined above, we make available a great amount of information for specific use cases providing the user with a great starting point. Each spool is labeled with a QRCode which provides direct access to the specific ExcelFil support database entry and we provide a smartphone ready website for quick lookup as well.

Product Features

  • Diameter and Roundness accuracy better than 0.05 mm
  • Fully opaque color with a shiny finish, no shortcuts taken on adding non-toxic color pigments
  • Only certified raw materials from USA and German suppliers, no scrap or recycle material
  • Formulated for low printing temperature for less blobbing and stringing
  • Strong layer bonds and very rigid when cooled

Check Out Our Website For Details…

Prototype Supply 1.75mm PLA Green 3D Printing Filament, 1kg (2.2 pounds)

Prototype Supply C1 series 3D printing filament – for demanding FDM applications

3D Printer operators looking for high-quality printed objects with better dimensional control, excellent layer adhesion, and a wide selection of colors are using Prototype Supply C1 3D printing filament.

Prototype Supply C1 filament is made especially for the needs of professional-quality 3D printing:

  • Manufactured specifically for use with 3D printers, not industrial plastic welding
  • High dimensional stability for improved accuracy.
  • Excellent melt and adhesion properties.
  • Wide spool diameter for straighter filament.
  • Greater selection of colors to choose from.

PLA 1.75mm
Compatible with:

  • Makerbot Replicator 2X, Replicator 2, Replicator, and Thing-o-Matic w/ Mk7 Stepstruder
  • Afinia H-Series
  • Up! Mini, Plus, and Plus2
  • Deezmaker Bukito
  • MakerGear M2
  • PrintrBot Simple, Plus, LC, original
  • QU-BD Revolution, RPM, OneUp, TwoUp
  • Other printers with 1.75mm compatible extruders and hot-ends

Product Features

  • 3D Printing Filament, Plastic, PLA, 1.75 mm diameter, 1.0 kg (Net Weight). Green (Clear)
  • High quality filament manufactured specifically for professional quality 3D printing.
  • Wide-core spool reduces extrusion difficulty caused by tightly coiled filament. 53-mm (2.1 inch) diameter mounting hole.
  • For Makerbot Replicator (Original and Duo-head), Replicator 2 and Replicator 2X; Afinia H-series; PP3DP Up!-series; Solidoodle 2 and 3; PrintrBot; Deezmaker Bukito; QU-BDÊRevolution, RPM, OneUp, and TwoUp; and other printers that accept 1.75 mm filament.
  • Recommended specifically for printers without a heated print bed. Works great with Makerbot Replicator, and Replicator 2.

Check Out Our Website For Details…