Sep 22, 2016 | By Andre
Josef Průša is, to me, the grandest legend in the desktop 3D printer space. When I became a little bit obsessed with 3D printing around five years ago it was the original RepRap Prusa Mendel 3D printer that I, like so many others, decided to build. It was he that continued strong with his open-source roots while other pioneers in the space closed source and changed direction.
So when I found out today that Prusa3D (a company that currently ships 1000 printers every month) announced a big firmware update for the Prusa I3 MK2 model that focuses on the current day kit builders out there I couldn’t have been happier.
Already equipped with automatic mesh bed levelling, a large 25x21x20cm build volume, onboard LCD panel, heated bed, and just about every feature one might expect from a desktop 3D printer (kit price starting at $699) this recent announcement should keep the makers out there excited.
The new firmware release (available for all Original Prusa i3 MK2 models) focuses on a function called Calibrate XYZ which automatically corrects for misaligned 3D printers so to avoid a bad first layer of printing. And as anyone that’s ever worked with 3D printers would know, an unlevelled 3D print surface means warped prints at the best and damaged extruder nozzles at the worst.
The bed levelling, although not the first of its kind, is based around a 9-point sensor system that also takes into account slight imperfections of the flatness every surface has. The idea is that even though your bed might technically be level, the surface might not be. So what happens is a high resolution map of the surface height, which the printhead follows along with, is generated and this is said to generate the perfect first layer.
The problem, up until this new firmware release, is that unless you had a perfectly built MK2 3D printer (and lets be honest, building a printer from a kit is tricky at the best of times) the calibration points were often missed.
But now, as Josef Prusa indicates, “the measured data are then used the verify how well the printer was built and if the result is not optimal the magic begins. The geometry of the assembled 3D printer is calculated and from that point on used to automatically compensate and get perfectly precise parts!”
And while its the sophisticated hardware that makes the MK2 run the way it does, it’s the ongoing and open tweaks to the firmware and software side of things that make sure everything runs a perfectly as possible and Prusa knows this. I remember being at a Makerfaire in NYC a few years ago and during a quick talk given by Josef he mentioned that “basically all the machines you can see out there, the limitations aren’t hardware but it’s mostly software.”
So after all these years and with all these updates It seems like he’s kept to his philosophy and just knowing how hard he and his team continue to work makes me excited they are producing 1,000 printers a month. That’s a milestone for any 3D printer company to be sure.
Posted in 3D Printer
Maybe you also like: