SainSmart Assembled J-head Hotend Nozzle 0.35mm for 1.75mm Nozzle Fitting, 3D Printer Printing Filament Reprap MakerBot Kossel Delta

Removed the heat sink and added a series of vents to provide cooling. To
reduce weight, an aluminum nozzle is used.

This J-Head Hot End is designed based on other nozzle. It’s very simple by
reducing the number of custom machined parts to a bare minimum.

The J-Head Hot End can easily and well interface with the most popular RepRap
extruders. The filament path is same with the one of an already proven design,
it can be used to print reliably with both ABS and PLA. If using PLA, it
requires a small fan to provide air-flow through the cooling vents milled in the
sides of the nozzle holder. Besides, the Hot End has another two advantages.
Heat transmission is more efficiency as there is no thermal junction where a
separate heater screws onto the nozzle. And a resistor is used as a heater.
There is no need to wrap nichrome wire or to bake a heater core.

Features:

* Resistance of resistor 4.7Ω

* Resistor rated power 8W

Product Features

  • This J-Head Hot End is designed based on other nozzle.
  • It’s very simple by reducing the number of custom machined parts to a bare minimum.
  • The J-Head Hot End can easily and well interface with the most popular RepRap extruders.
  • The filament path is same with the one of an already proven design, it can be used to print reliably with both ABS and PLA.
  • Removed the heat sink and added a series of vents to provide cooling. To reduce weight, an aluminum nozzle is used.

Visit The Website For More Information…

Signstek 3D Printer MKV MKIV J-Head Hot End 0.35mm nozzle for 1.75mm ABS and PLA Filament 3D Printer RepRap Prusa Mendal

This J-Head Hot End is designed based on other nozzle. It’s very simple by reducing the number of custom machined parts to a bare minimum. The J-Head Hot End can easily and well interface with the most popular RepRap extruders.

It can be used to print reliably with both ABS and PLA.

Product Features

  • Nozzle:0.35mm
  • Comes with 70CM cables
  • Designed for 1.75mm filament
  • Efficient heat transmission
  • Eeasily and well interface with the most popular RepRap extruders

Visit The Website For More Information…

RioRand(TM) Reprap Hot End 2.0 version with 0.35mm & 0.4mm nozzle,3D printer,Mendel

The 2.0 version is a high performance hotend for use with RepRap and other 3D printers,making your printing even faster. The hot end comes completely assembled: wire it to your electronics and it is ready to print. It now includes an aluminum mount plate and aluminum heat sinks. The 2.0 also brings changes to the nozzle, heater block, and threaded extension with harder aluminum and revised thread profile for more reliable nozzle changes.
Optional nozzle sizes are available from 0.25mm to 0.75mm. With the optional PTFE tube, you can print 3mm filament.
The hotend comes assembled with both 0.35mm and 0.4mm nozzle. Otherwise, if you would like a different nozzle size you will need to purchase an extra nozzle and make the change once you receive both parts.

Features:
Aluminum Block Resistor Hotend
Easily assembled and torn down with no glue or ceramic
Wire Strain Relief
Includes machined aluminum and steel parts, and laser cut wooden parts
Includes pre-crimped wiring

Package list:
1 x hot end 2.0 version
1 x 0.35mm nozzle
1 x 0.4mm nozzle

Product Features

  • Powered by RioRand advanced technology
  • RioRand(TM) Reprap Hot End 2.0 version with 0.35mm & 0.4mm nozzle,3D printer,Mendel

Detailed Information available on our Homepage…

Kamo 3D Printer MKV MKIV J-Head Hot End 0.35mm nozzle for 1.75mm ABS and PLA Filament 3D Printer RepRap Prusa Mendal

Description:

This J-Head Hot End is assembled and designed based on other nozzle. It’s very simple by reducing the number of custom machined parts to a bare minimum. The J-Head Hot End can easily and well interface with the most popular RepRap extruders.

The filament path is same with the one of an already proven design, it can be used to print reliably with both ABS and PLA. If using PLA, it requires a small fan to provide air-flow through the cooling vents milled in the sides of the nozzle holder. Besides, the Hot End has another two advantages. Heat transmission is more efficiency as there is no thermal junction where a separate heater screws onto the nozzle. And a resistor is used as a heater. There is no need to wrap nichrome wire or to bake a heater core.

Product Features

  • Nozzle:0.35mm
  • Comes with 70CM cables
  • Designed for 1.75mm filament
  • Eeasily and well interface with the most popular RepRap extruders
  • Efficient heat transmission

Visit The Website For More Information…