Nozzle Cleaning KIT 3D Printer Extruder Nozzle Head Cleaner PRINT HEAD NOZZLE/BITS/TOOL 0.3mm(3bits) 0.4mm(4bits) 0.5mm(3bits) + Multi-functional BIT HOLDING TOOL + (1 each) Nozzles 0.3mm 0.4mm 0.5mm for MK7 MK8 Makerbot RepRap 1.75mm filament ABS PLA printers

3D Printer Extruder Nozzle Head Cleaner KIT.30mm(3bits), .40mm(3bits), .50mm(4bits) + Multi-functional BIT HOLDING TOOL + 3 nozzles:

THE BITS: These Micro-drill bit Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These nozzles are very difficult to clean properly. These micro dtill bits are of the highest quality, made in Japan. They are the perfect tool for the job. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints. If you need another size or have any questions, contact us and we will take care of you.

THE TOOL: This multi-functional tool is perfect for hand cleaning the nozzle head to your 3D printer. You can use a drill to do the job, but the hand held tool is more safe. The high speeds of electric drills can cause damage to the nozzle head if the user does not have very steady hands. This tool is very easy to hold and compact at 4″ long. It comes with two double sided chucks that store inside the tool. The tool can be used for other projects or to work on your 3D printer.

THE NOZZLES: 1 each: .30mm, .40mm, .50mm Print Head For 1.75MM filament for MK7 MK8 makerbot RepRap print nozzle for ABS/PLA printers.

Product Features

  • The Bits: .30mm(3bits) .40mm(4bits) .50mm(3bits) (10 total bits)
  • Bits are Japanese made and come in a protective plastic case
  • Nozzle Sizes: (1 each) 0.3mm, 0.4mm, 0.5mm for MK7 MK8 Makerbot RepRap models
  • Compatible with 1.75mm filament ABS and PLA printers
  • The TOOL: 4″ comfortably held nozzle cleaning tool

Detailed Information available on our Homepage…

SainSmart 3D Printing Kit with RAMPS 1.4 + SD Card Breakout + A4988 Driver + 2004LCD with Controller + MEGA2560 R3 + Mechanical Endstop + Heatbed + Thermistor + 0.5mm Nozzle + Cooler Fan for Arduino

Smart Controller contains a SD-Card reader, an rotary encoder and a 20 Character
x 4 Line LCD display. You can easy connect it to your Ramps board. After
connecting this panel to your Ramps you don’t need your pc any more, the Smart
Controller supplies power for your SD card. Further more all actions like
calibration, axes movements can be done by just using the rotary encoder on the
Smart Controller. Print your 3D designs without PC, just with a g-code design
stored on the SD card.

SainSmart Mechanical Endstop perfect for any 3D printer also for use on CNC
machines and other electronic applications.

SainSmart SD Ramps: Breakout board for the microSD socket that is not much
bigger than your fingernail. Compatible with the SPI interface found on any SD
card, this tiny form factor was created for cell phone storage and is perfect
for your next 3D printer project! Board comes fully assembled and tested.The
bare socket is available.

SainSmart Heatbed MK2,Borosilicate Glass, Aluminium Bed Mount Plate is the
latest and the best type of heatbed money can buy as of today. 100% compatible
with all Prusa and Mendel 3d printer variants. (We will provide you another two
100K ohm thermistor as a gift.

Package Content:

1 x RAMPS 1.4
1 x Mega 2560 R3
5 x A4988 driver
1 x LCD2004 With Controller
1 x SD card breakout For ramps
2 x Cooler Fan for 3D ramps
6 x Mechanical Endstop with cable
1 x RAMPS 1.4 wiring cable
1 x Heatbed MK2b
2 x thermistor For headbed(100K ohm)
1 x Borosilicate Glass
1 x Aluminium Bed Mount Plate
5 x NEMA 17 Stepper Motors
1 x Assembled J-head Hotend Nozzle.
5 x GT2 20T Aluminum Pulley
1 x GT2 Timing Belt
1 x USB Cable

Note: If you need any technical support of instructions, please contact our customer service.

Product Features

  • Sainsmart A4988 driver is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu; we therefore recommend careful reading of the A4988 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil. We will provide you additional heat sink for you as a gift.
  • Sainsmart Mega2560 R3 is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. Arduino development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works.
  • Sainsmart RAMPS 1.4 is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces a Mega with the powerful MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on a MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. This board is mostly based on Adrian’s Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by Vik. Also inspired by Vik’s work with EasyDrivers. circuit design based mostly on Adrian’s Pololu_Electronics Joaz at RepRapSource.com supplied initial pin definitions and many design improvements. Much inspiration, suggestions, and ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap community.

Visit The Website For More Information…

Kingstorm 5PCS 3D Printer 0.5mm Extruder Brass Nozzle Print Head for Makerbot MK8 1.75mm ABS PLA Printer

Specifications:

Material: copper (brass)

Input Diameter: 1.75mm

Output Diameter: 0.5mm

Color: copper color

Size: 13mm*6mm

Package included:

5PCS * 0.5mm Mk8 Replacement Nozzle

Product Features

  • Brand:Kingstorm
  • Nozzle Size: 0.5mm
  • Input Diameter: 1.75mm
  • Material: copper (brass)
  • Size: 10*16(mm), M6

Detailed Information available on our Homepage…