Voltivo ExcelFil Ash Grey PLA 1.75mm 3D Printing Filament (1kg/2.2lbs spool)

Voltivo ExcelFil is a high grade, high density 3D printing filament available in both PLA and ABS perfectly suited for and tested with a wide range of 3D printers. It allows for easy extrusion due to its tight laser-controlled tolerances, smooth flow characteristics over a large temperature range, rapid cooling and a high tensile strenght.

ExcelFil comes in a large range of colors and in two diameters to fit most printers available. We ship ExcelFil on sturdy recycleable spools, vacuum sealed with a desiccant bag to ensure it arrives moisture free. Unlike other vendors, we provide full support information on our filaments on our ExcelFil Support Site.

Filament characterization

We in average spend 2 weeks to test and characterize each new material, diameter and color combination in many different semi-automated tests. Above and beyond the manufacturing quality control, we re-run these tests on a quarterly basis to ensure we always ship a product that provides reliable and repeatable print results while using ExcelFil

Filament Print Support Database

Creating successful prints greatly depends on the correct print settings. 3D printing still unfortunately is not as straight forward as desktop printing. The combination of material, the color, the 3D model, the slicing software and the printer hardware used all greatly influence successful print results. Based on the characterisation tests outlined above, we make available a great amount of information for specific use cases providing the user with a great starting point. Each spool is labeled with a QRCode which provides direct access to the specific ExcelFil support database entry and we provide a smartphone ready website for quick lookup as well.

Product Features

  • Diameter and Roundness accuracy better than 0.05 mm
  • Fully opaque color with a shiny finish, no shortcuts taken on adding non-toxic color pigments
  • Only certified raw materials from USA and German suppliers, no scrap or recycle material
  • Formulated for low printing temperature for less blobbing and stringing
  • Strong layer bonds and very rigid when cooled

Check Out Our Website For Details…

ABS 3D Printer Printing Plastic Filament 1kg/2.2lbs 1.75mm/3mm For FDM Print Tolerances:+- 0.02mm! ZERO Bubble! Orange

The best 3D printing filament on the market

1.This filament holds a diameter tolerance of 0.02mm which improves reliability and quality of output

2.It comes vacuum-sealed with the desiccant on a 1kg (2.2lb) reel. Well protect the filament from air affection.

3.No air bubbles:Moisture laden filament will tend to bubble and spurt from the tip of the nozzle when printing; reducing the visual quality of the part, part accuracy, strength and introducing the risk of a stripping or clogging in the nozzle.

We tested many filaments at both 100-micron and 200-micron layer resolution on FDM printers and this one is the best.

Difference Between Materials

Please select the right material before printing, and remember to set the proper working
temperature for filaments!

ABS filament all in 1 – Click here
PLA filament all in 1 – Click here
For more filament ,please search in ?iRulu? store. – Click here

Product Features

  • 1.Please view the description before place an order
  • 2. High strength good toughness and bright color.
  • 3. Cost-effective, it can be processed in wide range temperature.
  • 4. 1kg plastic spool packaging, can be automatic feed.
  • 5. To be applied to a variety of 3D printer such as MakerBot, RepRap, Mendel, Huxley UP, Printer, WeisTek etc.

Detailed Information available on our Homepage…

Voltivo ExcelFil Snow White PLA 3mm 3D Printing Filament (1kg/2.2lbs spool)

Voltivo ExcelFil is a high grade, high density 3D printing filament available in both PLA and ABS perfectly suited for and tested with a wide range of 3D printers. It allows for easy extrusion due to its tight laser-controlled tolerances, smooth flow characteristics over a large temperature range, rapid cooling and a high tensile strenght.

ExcelFil comes in a large range of colors and in two diameters to fit most printers available. We ship ExcelFil on sturdy recycleable spools, vacuum sealed with a desiccant bag to ensure it arrives moisture free. Unlike other vendors, we provide full support information on our filaments on our ExcelFil Support Site.

Filament characterization

We in average spend 2 weeks to test and characterize each new material, diameter and color combination in many different semi-automated tests. Above and beyond the manufacturing quality control, we re-run these tests on a quarterly basis to ensure we always ship a product that provides reliable and repeatable print results while using ExcelFil

Filament Print Support Database

Creating successful prints greatly depends on the correct print settings. 3D printing still unfortunately is not as straight forward as desktop printing. The combination of material, the color, the 3D model, the slicing software and the printer hardware used all greatly influence successful print results. Based on the characterisation tests outlined above, we make available a great amount of information for specific use cases providing the user with a great starting point. Each spool is labeled with a QRCode which provides direct access to the specific ExcelFil support database entry and we provide a smartphone ready website for quick lookup as well.

Product Features

  • Diameter and Roundness accuracy better than 0.05 mm
  • Fully opaque color with a shiny finish, no shortcuts taken on adding non-toxic color pigments
  • Only certified raw materials from USA and German suppliers, no scrap or recycle material
  • Formulated for low printing temperature for less blobbing and stringing
  • Strong layer bonds and very rigid when cooled

Check Out Our Website For Details…

PLA 3D Printer Printing Plastic Filament 1kg/2.2lbs 1.75mm/3mm For FDM Print Tolerances:+- 0.02mm! ZERO Bubble!

ABS filament all in 1 – Click here

PLA filament all in 1 – Click here

For more filament ,please search in ‘iRulu’ store. – Click here

<p style="clear:both;max-width:779px;margin:2px;background:url(http://image.hyperay.com/Amazon/des-img/thumb-up.jpg
) no-repeat;height:496px;background-size:100% “>
<p style="clear:both;max-width:600px;margin:2px;background:url(http://image.hyperay.com/Amazon/des-img/thumb-up.jpg
) no-repeat;height:600px;background-size:100% “>

Product Features

  • 1. 3D printer ABS/PLA filament has been tested on RepRap, MakerBot, Mendel, Huxley UP, Printer, WeisTek.
  • 2. High strength and good toughness.
  • 3. Cost-effective, it can be processed in wide range temperature.
  • 4. 1kg plastic spool packaging, can be automatic feed.
  • 5. To be applied to a variety of 3D printer such as MakerBot, RepRap, Mendel, etc.

Check Out Our Website For Details…