[Sintron] 3D Printer Controller Kit RAMPS 1.4 + Mega 2560 R3 + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter For Arduino RepRap

Overview

(1) 3D Printer Controller RAMPS 1.4

It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion.

for more informations, you can check here : http://www.amazon.com/gp/product/B00JU41GQ4

(2) Mega 2560 R3

for more informations, you can check here : http://www.amazon.com/gp/product/B00E94CGTQ

(3) A4988 Stepper Motor Driver

A4988 is a complete microstepping motor driver with built-in translator for easy operation

for more informations, you can check here : http://www.amazon.com/gp/product/B00JXGT1G6

(4) LCD 12864 Graphic Smart Display Controller

This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the “smart adapter” included.

for more informations, you can check here : http://www.amazon.com/gp/product/B00L72FAZU

Package List

(1) RAMPS 1.4 x 1

(2) Mega 2560 R3 x 1

(3) A4988 Stepper Motor Driver with Heatsink x 5

(4) LCD 12864 Graphic Smart Display Controller x 1

(5) Smart Adapter x 1

(6) 30cm Cable x 2

(7) USB Cable x 1

(8) Storage Box x 1

Here is the firmware for you to use with Ramps 1.4 https://www.dropbox.com/s/56qbizg7l56k2lw/Marlin-Marlin_v1%20for%20lcd%2012864.zip Marlin for ramps 1.4 + A4988 stepper driver + LCD 12864 controller

Product Features

  • (1) 3D Printer Controller RAMPS 1.4 x 1
  • (2) Arduino-Compatible Mega 2560 R3 With USB Cable x 1
  • (3) A4988 Stepper Motor Driver With Heatsink x 5
  • (4) LCD 12864 Graphic Smart Display Controller Kit x 1
  • (5) Storage Box x 1

Click Here If You Need More Detailed Info…

3D printer kit 3D LCD12864 screen + RAMPS 1.4 + A4988 driver + 2560 R3 master BOARD SET

Product Features

  • 3D printer control board kit 1.57 control + 3D LCD2004 control board +4988 driver +2560 R3 MODULE SET

Visit The Website For More Information…

Casekingdom LCD12864 RAMPS 1.4 Board 2560 R3 Control Board A4988 Driver Kit For 3D Printer

  • A4988 driver:
  • Low RDS (ON) outputs
  • Automatic current decay mode detection / selection
  • Mixed with slow current decay mode
  • Synchronous rectification for low power dissipation
  • Internal UVLO
  • Crossover current protection
  • 3.3 and 5V compatible logic supply
  • Thermal shutdown circuit
  • Ground short circuit protection
  • Load short-circuit protection
  • Five selectable stepper modes: full, 1/2, 1/4, 1/8 and 1/16
  • Product Features

    • Power design of Mega 2560 R3 board. Arduino Mega power supply system has two options, USB direct power supply or an external power supply. Select the power supply will automatically switch.
    • Optional external power supply AC-to-DC adapter or battery, this limits the control board voltage range 6V ~ 12V. but if the voltage supplied is less than 6V, I / O ports may not provide the 5V voltage, so there will be no stable;
    • if the supplied voltage is greater than 12V, the regulator will have the device may overheat protection. are more likely to damage the Arduino MEGA. Therefore, the operation of the proposed power supply 6.5 ~ 12V, 7.5V or recommended power supply is 9V.
    • CD12864 Feature. Large screen: 12864LCD
    • Integration SD card in the back, after slicing the file into the SD card, you can select the corresponding files on the LCD. The board has encoder, can be achieved parameter adjustment, and the file selection print!

    Click Here If You Need More Detailed Info…