Octave Extruder Nozzle Multi Setting Temperature Switch for Afinia and UP! 3D Printers

Afinia and UP! 3D printers have a high filament melt point temperature on the extruder nozzle. This is approximately 260 degrees C. Third party filament generally has a lower melt point. This enhancement to the Afinia and UP! 3D Printers allows you to select from 127 possible preset temperature points ranging from 180° up to 266°.

Easily installs in extruder cover.

Non-invasive in-line connection.

Installs in less than 2 minutes – snaps into extruder cover.

Switches select from 127 preset temperatures, ranging from 180° to 266°.

Allows easier raft removal.

This modification is neither approved nor disapproved by the Afinia and UP! manufacturers. We need to advise customers that this may affect your warranty if the manufacturer receives a printer for repair with the modification installed or becomes aware that it is being used. However the temperature switch can be removed in less than a minute.

Extruder Nozzle Temperature Switch also works with the UP! Mini.

Product Features

  • Easily installs in extruder cover.
  • Non-invasive in-line connection.
  • Installs in less than 2 minutes – snaps into extruder cover.
  • Switches select from 127 preset temperatures, ranging from 180° to 266°.
  • Allows easier raft removal.

Detailed Information available on our Homepage…

RioRand™ RepRap ABS Filament 1.75mm 1kg(2.2lbs)/roll for 3D Printer, Reprap, MakerBot, Afinia, UP!, Solidoodle 2, Printrbot LC, MakerGear M2 Static Dissipative (Red)

Powered by RioRand advanced technology

3D printer has been used by designers, engineers and scientists to produce the disposable mechanical products and model, and it is already widely used in health care, education, toys, building, automobile, electronics, and anime field.
ABS is one of the most commonly used engineering plastics, it’s a recommended material for beginners by RepRap because of the loose temperature requirement during extrusion process and often used in electronic, electrical, automotive, household and etc… ABS is one of most welcomed material for 3D printe.


Advantages of ABS Plastic Include:
? High impact strength even at low temperatures
? Easy processing
? Low heat conductivity
? Resistant to corrosion and abrasion
? Non-toxic, no halogens
? Smooth surface finish
? Light weight
? Recyclable

Product Features

  • Powered by RioRand advanced technology
  • RioRand(TM) RepRap ABS Filament 1.75mm 1kg(2.2lbs)/roll for 3D Printer, Reprap, MakerBot, Afinia, UP!, Solidoodle 2, Printrbot LC, MakerGear M2

Detailed Information available on our Homepage…

Octave Extruder Nozzle 8 Setting Temperature Switch for Afinia and UP! 3D Printers

Afinia and UP! 3D printers have a high filament melt point temperature on the extruder nozzle. This is approximately 260 degrees C. Third party filament generally has a lower melt point. This enhancement to the Afinia and UP! 3D Printers allows you to select from 8 possible preset temperature points ranging from 209° to 266 °.

Easily installs in extruder cover.

Non-invasive in-line connection.

Installs in less than 2 minutes – snaps into extruder cover.

Switches select from 8 preset temperatures, ranging from 209° to 266 °.

Allows easier raft removal.

This modification is neither approved nor disapproved by the Afinia and UP! manufacturers. We need to advise customers that this may affect your warranty if the manufacturer receives a printer for repair with the modification installed or becomes aware that it is being used. However the temperature switch can be removed in less than a minute.

Extruder Nozzle Temperature Switch also works with the UP! Mini.

Product Features

  • Easily installs in extruder cover.
  • Non-invasive in-line connection.
  • Installs in less than 2 minutes – snaps into extruder cover.
  • Switches select from 8 preset temperatures, ranging from 209° to 266 °.
  • Allows easier raft removal.

Detailed Information available on our Homepage…

Spool3d 1.75mm Green ABS Filament 1kg (2.2lbs) spool for Reprap, Makerbot, Afinia & UP! 3D Printer

Top quality 1.75mm Green ABS filament produced by SPOOL3D for excellent 3D printing results. The high quality filament is compatible with Afinia, Reprap, UP!, Makerbot, Prntrbot, UltiMaker and countless others. The filament is manufactured with strict guidelines and standards in order to achieve a wide temperature range and fewer extruder nozzle problems, allowing for a high quality print. Spool3d offers both PLA & ABS filament options in an array colors. Material Ð ABS Diameter Ð 1.75mm Net Weight Ð 1KG (2.2lb) Gross Weight Ð 1.4KG (3.1lb) Tolerance on Roundness – +/- 0.05mm Temperature Range Ð 210¡C Ð 250¡C Best Print Temperature – 230¡C Ð 250¡C

Product Features

  • 1kg 1.75mm Green ABS Filament.
  • Print temperature: 210 – 250¡C.
  • For 3D Printers Reprap, MakerBot Replicator 2, Afinia, Solidoodle 2, Printrbot, MakerGear & many more.
  • Manufactured to very tight tolerances and a wide extruder temperature range.
  • Filament Roundness: +/-0.05mm; Filament Diameter: +/-0.10mm.

Visit The Website For More Information…