3D Printer Controller for RAMPS 1.4 REPRAP MENDEL PRUSA for Arduino

3D Printer Controller for RAMPS 1.4 REPRAP MENDEL PRUSA for Arduino
With rules of cartesian coordinate robot and extruder.
Could control spare parts.
With heater/fan output/three thermistor MOSFET.
Integrated 5A extra safety and components protection.
Suit for 5 Pololu stepper driver plate.
Pololu plate pin socket.
I2C/SPI pin for future development.
All MOSFET with PWM pins.
Servo connector used to connect end dog, motor and lighting diode. Rated current 3A.
SD card add Kliment-Sdramps.
LED indicates heater output.
Two motor connects to Z Prusa Mendal.
Size: 11.5cm x 3cm.
Package Included:

Product Features

  • With rules of cartesian coordinate robot and extruder.
  • Could control spare parts.
  • With heater/fan output/three thermistor MOSFET.

Visit The Website For More Information…

[Sintron] 3D Printer Controller Kit RAMPS 1.4 + Mega 2560 R3 + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter For Arduino RepRap

Overview

(1) 3D Printer Controller RAMPS 1.4

It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion.

for more informations, you can check here : http://www.amazon.com/gp/product/B00JU41GQ4

(2) Mega 2560 R3

for more informations, you can check here : http://www.amazon.com/gp/product/B00E94CGTQ

(3) A4988 Stepper Motor Driver

A4988 is a complete microstepping motor driver with built-in translator for easy operation

for more informations, you can check here : http://www.amazon.com/gp/product/B00JXGT1G6

(4) LCD 12864 Graphic Smart Display Controller

This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the “smart adapter” included.

for more informations, you can check here : http://www.amazon.com/gp/product/B00L72FAZU

Package List

(1) RAMPS 1.4 x 1

(2) Mega 2560 R3 x 1

(3) A4988 Stepper Motor Driver with Heatsink x 5

(4) LCD 12864 Graphic Smart Display Controller x 1

(5) Smart Adapter x 1

(6) 30cm Cable x 2

(7) USB Cable x 1

(8) Storage Box x 1

Here is the firmware for you to use with Ramps 1.4 https://www.dropbox.com/s/56qbizg7l56k2lw/Marlin-Marlin_v1%20for%20lcd%2012864.zip Marlin for ramps 1.4 + A4988 stepper driver + LCD 12864 controller

Product Features

  • (1) 3D Printer Controller RAMPS 1.4 x 1
  • (2) Arduino-Compatible Mega 2560 R3 With USB Cable x 1
  • (3) A4988 Stepper Motor Driver With Heatsink x 5
  • (4) LCD 12864 Graphic Smart Display Controller Kit x 1
  • (5) Storage Box x 1

Click Here If You Need More Detailed Info…

Casekingdom 3D Printer RAMPS 1.4 LCD12864 Intelligent Controller LCD Control Board

  • Module: 9.3 x 8.7 cm (L x W)
  • Screen: about 3 inch
  • Cable: 21 x 1.3 cm (L x W)
  • L type adapter: 6.2 cm (L)
  • Product Features

    • Large screen: 12864LC. Integration SD card in the back, after slicing the file into the SD card, you can select the corresponding files on the LCD.
    • The board has encoder, can be achieved parameter adjustment, and the file selection print. The ramps can be Plug-and-Play, but it need to modify the firmware to support.
    • Note:
    • This controller support SD card offline printing.
    • Package is not included the SD card.

    Click Here For More Information

    SainSmart 3D Printing Kit with RAMPS 1.4 + SD Card Breakout + A4988 Driver + 2004LCD with Controller + MEGA2560 R3 + Mechanical Endstop + Heatbed + Thermistor + 0.5mm Nozzle + Cooler Fan for Arduino

    Smart Controller contains a SD-Card reader, an rotary encoder and a 20 Character
    x 4 Line LCD display. You can easy connect it to your Ramps board. After
    connecting this panel to your Ramps you don’t need your pc any more, the Smart
    Controller supplies power for your SD card. Further more all actions like
    calibration, axes movements can be done by just using the rotary encoder on the
    Smart Controller. Print your 3D designs without PC, just with a g-code design
    stored on the SD card.

    SainSmart Mechanical Endstop perfect for any 3D printer also for use on CNC
    machines and other electronic applications.

    SainSmart SD Ramps: Breakout board for the microSD socket that is not much
    bigger than your fingernail. Compatible with the SPI interface found on any SD
    card, this tiny form factor was created for cell phone storage and is perfect
    for your next 3D printer project! Board comes fully assembled and tested.The
    bare socket is available.

    SainSmart Heatbed MK2,Borosilicate Glass, Aluminium Bed Mount Plate is the
    latest and the best type of heatbed money can buy as of today. 100% compatible
    with all Prusa and Mendel 3d printer variants. (We will provide you another two
    100K ohm thermistor as a gift.

    Package Content:

    1 x RAMPS 1.4
    1 x Mega 2560 R3
    5 x A4988 driver
    1 x LCD2004 With Controller
    1 x SD card breakout For ramps
    2 x Cooler Fan for 3D ramps
    6 x Mechanical Endstop with cable
    1 x RAMPS 1.4 wiring cable
    1 x Heatbed MK2b
    2 x thermistor For headbed(100K ohm)
    1 x Borosilicate Glass
    1 x Aluminium Bed Mount Plate
    5 x NEMA 17 Stepper Motors
    1 x Assembled J-head Hotend Nozzle.
    5 x GT2 20T Aluminum Pulley
    1 x GT2 Timing Belt
    1 x USB Cable

    Note: If you need any technical support of instructions, please contact our customer service.

    Product Features

    • Sainsmart A4988 driver is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu; we therefore recommend careful reading of the A4988 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil. We will provide you additional heat sink for you as a gift.
    • Sainsmart Mega2560 R3 is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. Arduino development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works.
    • Sainsmart RAMPS 1.4 is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces a Mega with the powerful MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on a MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. This board is mostly based on Adrian’s Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by Vik. Also inspired by Vik’s work with EasyDrivers. circuit design based mostly on Adrian’s Pololu_Electronics Joaz at RepRapSource.com supplied initial pin definitions and many design improvements. Much inspiration, suggestions, and ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap community.

    Visit The Website For More Information…