SainSmart 3D Printing Kit with RAMPS 1.4 + SD Card Breakout + A4988 Driver + 2004LCD with Controller + MEGA2560 R3 + Mechanical Endstop + Heatbed + Thermistor + 0.5mm Nozzle + Cooler Fan for Arduino

Smart Controller contains a SD-Card reader, an rotary encoder and a 20 Character
x 4 Line LCD display. You can easy connect it to your Ramps board. After
connecting this panel to your Ramps you don’t need your pc any more, the Smart
Controller supplies power for your SD card. Further more all actions like
calibration, axes movements can be done by just using the rotary encoder on the
Smart Controller. Print your 3D designs without PC, just with a g-code design
stored on the SD card.

SainSmart Mechanical Endstop perfect for any 3D printer also for use on CNC
machines and other electronic applications.

SainSmart SD Ramps: Breakout board for the microSD socket that is not much
bigger than your fingernail. Compatible with the SPI interface found on any SD
card, this tiny form factor was created for cell phone storage and is perfect
for your next 3D printer project! Board comes fully assembled and tested.The
bare socket is available.

SainSmart Heatbed MK2,Borosilicate Glass, Aluminium Bed Mount Plate is the
latest and the best type of heatbed money can buy as of today. 100% compatible
with all Prusa and Mendel 3d printer variants. (We will provide you another two
100K ohm thermistor as a gift.

Package Content:

1 x RAMPS 1.4
1 x Mega 2560 R3
5 x A4988 driver
1 x LCD2004 With Controller
1 x SD card breakout For ramps
2 x Cooler Fan for 3D ramps
6 x Mechanical Endstop with cable
1 x RAMPS 1.4 wiring cable
1 x Heatbed MK2b
2 x thermistor For headbed(100K ohm)
1 x Borosilicate Glass
1 x Aluminium Bed Mount Plate
5 x NEMA 17 Stepper Motors
1 x Assembled J-head Hotend Nozzle.
5 x GT2 20T Aluminum Pulley
1 x GT2 Timing Belt
1 x USB Cable

Note: If you need any technical support of instructions, please contact our customer service.

Product Features

  • Sainsmart A4988 driver is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu; we therefore recommend careful reading of the A4988 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil. We will provide you additional heat sink for you as a gift.
  • Sainsmart Mega2560 R3 is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. Arduino development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works.
  • Sainsmart RAMPS 1.4 is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces a Mega with the powerful MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on a MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. This board is mostly based on Adrian’s Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by Vik. Also inspired by Vik’s work with EasyDrivers. circuit design based mostly on Adrian’s Pololu_Electronics Joaz at RepRapSource.com supplied initial pin definitions and many design improvements. Much inspiration, suggestions, and ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap community.

Visit The Website For More Information…

RioRand Cooler Axial Fan 12V 40x40x15mm for 3D Printer,RepRap, Prusa Mendel


Small fan, for mounting on an extruder for example.
Dimensions: 30x30x10mm

Voltage: 12V

Amperage: 0.08A

Power connector:2pin

Product Features

  • Powered by RioRand Advanced Technology

Click Here For More Information

Geeetech 3D Printer RepRap Kits-RAMPS1.4 Shield,Mega2560,Smart LCD2004/LCD12864 Display with Pololu stepper motor driver & Heatsink & Cooler Fan… (A4988 & Rectangle LCD12864 KIT)

Package List

1 x RAMPS 1.4

1 x Mega2560 Board

5 x A4988 Stepper Driver

5 x Heatsink

2 x Heatsink sticker

1 x USB cable

1 X Rectangle LCD12864 with adaptor for RAMPS1.4

1 X SD module for RAMPS1.4

1 X 40x40mm 3pin cooler fan

3 X Mechanical endstop

5 X 70cm 2pin Female-to-Female jumper cable

5 X 70cm 3pin Female-to-Female jumper cable

5 X 70cm 4pin Female-to-Female jumper cable

1. LCD12864 Display

This item contains a SD-Card reader, an rotary encoder and a 128 Character x 64 Line LCD display. Added a small function which is LED backgroud light control circuit to smart controller, with shorting the pins to decide the LED turn on all the time or turn on 30 seconds and than turn off automaticly.IF you used to start the printing jobs at night and get the parts at the next morning , that means with the new modification LCD back light will not annoying you any more ,you can make the time of light turn on longer or shorter by adjust the TRIMM R4 100K form 10s to 2mins.

2.A4988 driver

This product is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu; we therefore recommend careful reading of the A4988 datasheet before using this product.

3.Heatsink

The 11x11x5mm heatsink is for StepStick stepper drivers.

4.SD Breakout for RAMPS

Ever wanted to run your RepRap from SD card? Here is your chance! This RAMPS add-on enables you to print from MicroSD.With RAMPS 1.3 and higher it’s easily connected to the RAMPS board.

Visit The Website For More Information…

SainSmart Ramps 1.4 + A4988 + Mega2560 R3 + Endstop + MK2B + Cooler Fan Kit for RepRap 3D Printer Arduino Mega2560 UNO R3

This SainSmart 3D Printer Kit with hundreds of Arduino projects is invented
by SainSmart for Arduino lovers. This Kit is recommended for the beginners who
are interested in leaning the basics of Arduino programming as well as the
experts in Programming. Components are included in the kit to get you started
making your own Arduino Projects.

What’s more, a PDF Tutorial Instruction Manual will be provided for you to
download, which can definitely give you a full into to Arduino programming as
well how to use each component included in this
kit. Once you’ve gone through the instruction guide and mastered the basics of
each component go ahead and make your own project combing one or many
components. With this kit you will learn what Arduino is all about and how it is
used.

Package Content

1 x RAMPS 1.4

1 x Mega 2560 R3

5 x A4988 driver

1 x LCD 2004 With Controller

1 x SD card breakout For ramps

1 x Cooler Fan for 3D ramps

6 x Mechanical Endstop with cable

1 x RAMPS 1.4 wiring cable

1 x Heatbed MK2B

1 x USB Cable

Note:Please download the codes & instructions via
the below link:

https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-011-962/3D.rar

https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/ramps.rar

https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/3d+lcd+software/arduino-1.0.1.rar

Product Features

  • Sainsmart A4988 driver is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu; we therefore recommend careful reading of the A4988 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil.
  • MK2B is the latest and the best type of heatbed money can buy as of today. 100% compatible with all Prusa and Mendel 3d printer variants. Etching: 35um copper. Laminate: FR4 1.6mm
  • Sainsmart RAMPS 1.4 is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. This board is mostly based on Adrian’s Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by Vik. Also inspired by Vik’s work with EasyDrivers. circuit design based mostly on Adrian’s Pololu_Electronics Joaz at RepRapSource.com supplied initial pin definitions and many design improvements. Much inspiration, suggestions, and ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap community.
  • Sainsmart Mega2560 R3 is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. Arduino development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works.
  • Sainsmart LCD 2004 with Controller This Smart Controller contains a SD-Card reader, an rotary encoder and a 20 Character x 4 Line LCD display. You can easy connect it to your Ramps board using the “smart adapter” included. After connecting this panel to your Ramps you don’t need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.

Visit The Website For More Information…