Dremel 3D Printer Supplies – 10 Sheets 6″ x 9.25″ 3M 2090 Painters Tape – Use PLA Filament on this Tape

This Rectangle Piece of Painters Tape will cover the Dremel’s 3D Printer Print Bed with one single piece.

Perfect 1 piece application!

Nearly all filament types (ie PLA) will stick to this tape, but come off with relative ease after printing is completed.

This tape removes cleanly without adhesive transfer or surface damage for up to 14 days, even in direct sunlight.
It is a medium adhesion tape that is ideal for painted walls and trim, woodwork, glass and metal.

Dremel Includes only a Few Sheets in the original Factory Printer Box, they do not sell extra Sheets.
The Only Place to get more of the same Blue Tape Sheets is right here on this Page.
Blue Tape Sheets made by 3M are the only recommended way to print on the original Acrylic Print Bed, or the Upgraded Glass Plates (that you can get on Amazon too).

Instructions:

Step 1. Clean the Printing Bed Off with some Rubbing Alcohol.
Step 2. Remove the Tape Sheet from its Backing and apply to the Surface of the Printing Bed.
Step 3. Clean the Taped surface off with some Rubbing Alcohol.
Step 4. Make Sure that if you haven’t leveled the print bed with the tape on it, that you go through the leveling procedure to adjust for the extra thickness of the tape.
Step 5. After Printing make sure to carefully remove the printed piece from the tape with a thin spatula.
Step 6. After Each Print clean the Tape Off with some Rubbing Alcohol.

Each Sheet of Tape should last for many prints, depending on the type/size of prints you do.
To make it last longer, try printing on different sections of the tape bed to get the most from it.

This is High Quality 3M 2090 Scotchblue Tape Made in the USA.
It can’t be found anywhere else so Buy Now

Product Features

  • 6in x 9.25in Tape – 10 Sheets – To be Used on the Dremel 3D Printer Build Plate when printing
  • Perfect Tape to use for any 3D Printer that Prints with PLA Filament
  • Prints come off cleanly with no lines on the bottom from multiple pieces of tape.
  • Applies to the surface cleanly, and easily with easy re position just lift off and reapply.
  • Perfectly sized for the Dremel 3D Printer Build Plate

Click Here For More Information

Dremel PLA 3D Printer Filament, 1.75 mm Diameter, 0.5 kg Spool Weight, White Translucent

Dremel PLA filament has been specifically engineered for optimal printing with your Idea Builder. PLA is a thermal plastic that softens and melts when it’s heated, building your designs strand by strand and layer by layer. Our PLA has been designed to melt at a temperature compatible with the Idea Builder, producing a stable, strong object with a high quality finish.

Product Features

  • Dremel PLA filament is plant-based and recyclable
  • Manufactured and tested to provide smooth and consistent building
  • Dremel offers a wide array of vibrant and dynamic colors to expand your creativity
  • White Translucent Color: 1.75mm PLA Filament
  • For use with the Dremel 3D20-01Idea Builder 3D Printer (sold separately)

Click Here For More Information

3D Printer Build Platform Tape for Dremel Idea Builder

Fifty Percent Fill’s 3d Printer Build Platform Tape for Dremel Idea Builder

Our Dremel Idea Builder printer tape is made in the USA and easy to install. No more worrying about PLA not sticking to the platform while you print. 6 inches wide (just like your build platform) so no seam either.. This tough tape is great for multiple prints, and easy to replace, and leaves no residue. A more affordable, cleaner, and easier option than Kapton tape. 180 feet of 3D printer tape, enough tape to cover your platform 90 times, that’s less than 35 cents per use, compare that with similar products at nearly $2 per sheet. Need something you dont see? or having trouble printing something particular? Shoot us an email! Proud to be an American Company.

Product Features

  • Perfect for PLA
  • 6 inches wide, No Seam, No Air Pockets on build platform
  • Easily Applies to Build Platform
  • Much cleaner and easier than Kapton
  • Better than 3M 2090 Painter’s Tape

Visit The Website For More Information…

Dremel DF02-01 PLA 3D Printer Filament, 1.75 mm Diameter, 0.8 kg Spool Weight, Black

Dremel PLA filament has been specifically engineered for optimal printing with your Idea Builder. PLA is a thermal plastic that softens and melts when it’s heated, building your designs strand by strand and layer by layer. Our PLA has been designed to melt at a temperature compatible with the Idea Builder, producing a stable, strong object with a high quality finish.

Product Features

  • Dremel PLA filament is plant-based and recyclable
  • Manufactured and tested to provide smooth and consistent building
  • Dremel offers a wide array of vibrant and dynamic colors to expand your creativity
  • Black Color: 1.75mm PLA Filament
  • For use with the Dremel 3D20-01Idea Builder 3D Printer (sold separately)

Click Here For More Information