Nozzle Cleaning KIT 3D Printer Extruder Nozzle Head Cleaner PRINT HEAD NOZZLE/BITS/TOOL 0.3mm(3bits) 0.4mm(4bits) 0.5mm(3bits) + Multi-functional BIT HOLDING TOOL + (1 each) Nozzles 0.3mm 0.4mm 0.5mm for MK7 MK8 Makerbot RepRap 1.75mm filament ABS PLA printers

3D Printer Extruder Nozzle Head Cleaner KIT.30mm(3bits), .40mm(3bits), .50mm(4bits) + Multi-functional BIT HOLDING TOOL + 3 nozzles:

THE BITS: These Micro-drill bit Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These nozzles are very difficult to clean properly. These micro dtill bits are of the highest quality, made in Japan. They are the perfect tool for the job. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints. If you need another size or have any questions, contact us and we will take care of you.

THE TOOL: This multi-functional tool is perfect for hand cleaning the nozzle head to your 3D printer. You can use a drill to do the job, but the hand held tool is more safe. The high speeds of electric drills can cause damage to the nozzle head if the user does not have very steady hands. This tool is very easy to hold and compact at 4″ long. It comes with two double sided chucks that store inside the tool. The tool can be used for other projects or to work on your 3D printer.

THE NOZZLES: 1 each: .30mm, .40mm, .50mm Print Head For 1.75MM filament for MK7 MK8 makerbot RepRap print nozzle for ABS/PLA printers.

Product Features

  • The Bits: .30mm(3bits) .40mm(4bits) .50mm(3bits) (10 total bits)
  • Bits are Japanese made and come in a protective plastic case
  • Nozzle Sizes: (1 each) 0.3mm, 0.4mm, 0.5mm for MK7 MK8 Makerbot RepRap models
  • Compatible with 1.75mm filament ABS and PLA printers
  • The TOOL: 4″ comfortably held nozzle cleaning tool

Detailed Information available on our Homepage…

Mbot MB3D102 GRID II 3D Printer Dual Extruder

As the leading desktop 3D printer manufacturer in China, Mbot believes in innovation since its foundation. From the very first wooden model to the latest upgraded model Grid II, the Mbot team maximizes creativity again and again to provide you a perfect desktop 3D printer.

The new and improved model Grid II has inherited the strong metal chassis design of the previous generation. Superior performance and easier operation, with innovations and optimizations according to user feedback.

The MBot Grid II is the first product created in cooperation with our new design center in Sweden.

This close collaboration between our Chinese design team and our Swedish team has resulted in novel and innovative features.

It’s the most advanced and cost-effective desktop 3D printer, beyond your expectation. We are sure you will be surprised!

The GRID II is a third generation printer from mbot3D. This sturdy metal frame 3d printer has one of the biggest build sizes on the market for desktop 3D Printers, 250x220x190mm. It is available in single head or dual head configuration.

The new printer features an automatic build plate calibration system that guides the user through the setup and then at every print probes the surface and uses the calibrated distance. The printer also features a glass build plate , and a magnetic build plate holder making it a breeze to remove your build plate to remove your prints, which ensures your build plate calibration is kept in top condition.

The mbot3D GRID II also feature single or dual print fans to make sure your PLA prints are perfect every time!

The printer is bundled with a SD card, and an exclusive tool box with the basic tools need for maintenance of the printer.

Product Features

  • 220*220*190mm Build Volume Dual Extruder
  • Automatic build plate calibration system that guides the user through the setup
  • The MBot Grid II is the first product created in cooperation with our new design center in Sweden
  • The GRID II is a third generation printer from mbot3D
  • Fast, easy, and affordable tool for making professional-quality models

Detailed Information available on our Homepage…

Shanhai Feedstock Wheel Extruder Gear Hobbed Gear Drive Gear for Reprap 3D printer

Feedstock Wheel Extruder Gear Hobbed Gear Drive Gear for Reprap 3D printer

Parameter£º

Inside diameter: 5 mm

The base diameter: 12 mm

The base height: 5 mm

The overall height: 13 mm

Knurling bottom diameter: 6 mm

The milled groove depth: 1 mm

Roll rachis long: 8 mm

long knurled surface: 6 mm

Product Features

  • Shanhai Feedstock Wheel Extruder Gear Hobbed Gear Drive Gear for Reprap 3D printer

Click Here For More Information

Octave Extruder Nozzle Multi Setting Temperature Switch for Afinia and UP! 3D Printers

Afinia and UP! 3D printers have a high filament melt point temperature on the extruder nozzle. This is approximately 260 degrees C. Third party filament generally has a lower melt point. This enhancement to the Afinia and UP! 3D Printers allows you to select from 127 possible preset temperature points ranging from 180° up to 266°.

Easily installs in extruder cover.

Non-invasive in-line connection.

Installs in less than 2 minutes – snaps into extruder cover.

Switches select from 127 preset temperatures, ranging from 180° to 266°.

Allows easier raft removal.

This modification is neither approved nor disapproved by the Afinia and UP! manufacturers. We need to advise customers that this may affect your warranty if the manufacturer receives a printer for repair with the modification installed or becomes aware that it is being used. However the temperature switch can be removed in less than a minute.

Extruder Nozzle Temperature Switch also works with the UP! Mini.

Product Features

  • Easily installs in extruder cover.
  • Non-invasive in-line connection.
  • Installs in less than 2 minutes – snaps into extruder cover.
  • Switches select from 127 preset temperatures, ranging from 180° to 266°.
  • Allows easier raft removal.

Detailed Information available on our Homepage…