HATCHBOX 1.75mm Green ABS 3D Printer Filament – 1kg Spool (2.2 lbs) – Dimensional Accuracy +/- 0.05mm

Welcome to Hatchbox 3D Printer Filament

Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm.

Frequently Asked Questions

1) Filament not extruding properly? A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament? A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Won’t the print stick to the build platform? A: First, review FAQ #1. Second, for PLA it’s recommended to use blue painters tape and ABS it’s recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use “*ABS Sludge” a little goes a long way. You can use this on the build platform on top of kapton tape.

*When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy.

Product Features

  • 1 KG (approximately 2.20 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • ABS (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant
  • Recommended Extrusion/Nozzle Temperature 210°C – 240°C (410°F – 464°F), Use With Heated Build Platform Is Recommended
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 1.50″

Check Out Our Website For Details…

USAFilament 1.75 mm PLA 3D Printing Filament 1 kg (2.2 lbs) Green Spool for 3D Printers

3D Printer Spools for many brands of 3D printers (Makerbot, Reprap, Makergear, Printrbot, UP! Printer, etc.). All items ship from locations in the US and are wrapped in air tight plastic, boxed and then reboxed for protection.

Product Features

  • Works with common 3D printers such as (Reprap, MakerBot, Afinia, Solidoodle 2, Printrbot LC, MakerGear M2, and UP!)
  • This filament is always round, with no oily residue, no air bubbles and comes loaded on a quality spool
  • All items ship from locations in the US and are wrapped in air tight plastic, boxed and then reboxed for protection.
  • Expert help on call

Check Out Our Website For Details…

3D Pen Filament ABS 1.75mm – Basics -(Black, Red,Yellow, Green, Dark Blue)

Filament for your ABS 1.75 mm compatible 3D Doodling Pen! Works great with the Lay3r 3D Drawing Pen.

Product Features

  • ABS 1.75 mm “Basics” color combo pack.
  • Includes: Black, Red,Yellow, Green, Dark Blue totaling over 6 meters of filament!
  • 100% Virgin Material

Check Out Our Website For Details…

Spool3d 1.75mm Green ABS Filament 1kg (2.2lbs) spool for Reprap, Makerbot, Afinia & UP! 3D Printer

Top quality 1.75mm Green ABS filament produced by SPOOL3D for excellent 3D printing results. The high quality filament is compatible with Afinia, Reprap, UP!, Makerbot, Prntrbot, UltiMaker and countless others. The filament is manufactured with strict guidelines and standards in order to achieve a wide temperature range and fewer extruder nozzle problems, allowing for a high quality print. Spool3d offers both PLA & ABS filament options in an array colors. Material Ð ABS Diameter Ð 1.75mm Net Weight Ð 1KG (2.2lb) Gross Weight Ð 1.4KG (3.1lb) Tolerance on Roundness – +/- 0.05mm Temperature Range Ð 210¡C Ð 250¡C Best Print Temperature – 230¡C Ð 250¡C

Product Features

  • 1kg 1.75mm Green ABS Filament.
  • Print temperature: 210 – 250¡C.
  • For 3D Printers Reprap, MakerBot Replicator 2, Afinia, Solidoodle 2, Printrbot, MakerGear & many more.
  • Manufactured to very tight tolerances and a wide extruder temperature range.
  • Filament Roundness: +/-0.05mm; Filament Diameter: +/-0.10mm.

Visit The Website For More Information…