HATCHBOX 1.75mm Green PLA 3D Printer Filament – 1kg Spool (2.2 lbs) – Dimensional Accuracy +/- 0.05mm

Welcome to Hatchbox 3D Printer Filament

Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.
The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm.

Frequently Asked Questions

1) Filament not extruding properly?
A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Won’t the print stick to the build platform?
A: First, review FAQ #1. Second, for PLA it’s recommended to use blue painters tape and ABS it’s recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use “*ABS Sludge” a little goes a long way. You can use this on the build platform on top of kapton tape.

*When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy.

Product Features

  • 1 KG (approximately 2.20 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
  • Recommended Extrusion/Nozzle Temperature 180°C – 210°C (356°F – 410°F)
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 1.50″

Check Out Our Website For Details…

USA Gear 3D Printing Filament , 3D Scanners , Supply Organizer and Carrying Bag with Adjustable Interior Compartments and Accessory Pockets – Works with XYZprinting ABS , Filament Outlet Black PLA , 3D Pen ABS , HATCHBOX and Octave and many others!

USA Gear Travel Ready 3D Printing Accessory Bag

Protective Design
This USA GEAR premium quality carrying case is made to protect and organize all your 3D Printing supplies. The bag’s FlexWall organization feature is an adjustable and removable system that can be reconfigured for the storage and transportation of your Filaments , Parts , Motors , Scanners , Books , Cables and many more! It also comes equipped with an internal mesh pocket for storing your Tool Kits , Power Cables , Small Devices , Flash-Drives etc. You can keep smaller accessories safe in the outer zipper pocket too! The soft, scratch-resistant interior lining protects your 3D Printing supplies from everyday wear and tear.

Portable Features
This compact and lightweight bag is perfect for bringing your gear with you on-the-go! It comes with an adjustable, removable shoulder strap for travel and also features a carrying handle for a secure grip. Keep convenience in mind when you’re ready to show your friends the exciting new world of 3D Printing!

Quality Construction
This travel bag is constructed from weather-resistant base and RipStop Nylon. It also has a heavy-duty padded exterior shell to ensure your tablet is safe from impacts!

Organize and Protect your…
3D Scanners / 3D Printing Filament / Ingredients / Kapton Tape / Replicators / Tool Kits / Bearings / Brass Nozzles / Platforms / Timing Belt / Build Surfaces / Insulation / Motors / Mounts / Racks / ABS Packs / Cleaning Tools / Lights and many more!

Product Features

  • Perfect bag for amateurs , professionals , hobbyists , enthusiasts , Scientists , Lab Technicians and many more!
  • Keep your 3D Printing Tools , 3D Scanners , 3D Printing Filaments and other Supplies separate with the adjustable FlexWall internal divider.
  • Thick foam padding, water-resistant bottom, RIPstop Nylon and plush scratch-proof interior will keep your 3D Printing Accessories safe and secure
  • Conveniently equipped wth a detachable shoulder strap and hand strap to take with you while on the go!
  • Internal Sleeve Pocket Dimensions – 11.5 x 8.5 x 4 inches / Also comes with 3 Year Manufacturer’s Warranty **Includes Lens Cleaning Cloth and Brush

Detailed Information available on our Homepage…

HATCHBOX 1.75mm White PLA 3D Printer Filament – 1kg Spool (2.2 lbs) – Dimensional Accuracy +/- 0.05mm

Welcome to Hatchbox 3D Printer Filament

Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.
The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm.

Frequently Asked Questions

1) Filament not extruding properly?
A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Won’t the print stick to the build platform?
A: First, review FAQ #1. Second, for PLA it’s recommended to use blue painters tape and ABS it’s recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use “*ABS Sludge” a little goes a long way. You can use this on the build platform on top of kapton tape.

*When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy.

Product Features

  • 1 KG (approximately 2.20 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
  • Recommended Extrusion/Nozzle Temperature 180°C – 210°C (302°F – 410°F)
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 1.50″

Check Out Our Website For Details…

HATCHBOX 1.75mm Red PLA 3D Printer Filament – 1kg Spool (2.2 lbs) – Dimensional Accuracy +/- 0.05mm

Welcome to Hatchbox 3D Printer Filament

Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.
The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm.

Frequently Asked Questions

1) Filament not extruding properly?
A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Won’t the print stick to the build platform?
A: First, review FAQ #1. Second, for PLA it’s recommended to use blue painters tape and ABS it’s recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use “*ABS Sludge” a little goes a long way. You can use this on the build platform on top of kapton tape.

*When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy.

Product Features

  • 1 KG (approximately 2.20 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
  • Recommended Extrusion/Nozzle Temperature 180°C – 210°C (302°F – 410°F)
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 1.50″

Check Out Our Website For Details…