SainSmart 3D Printing Kit with RAMPS 1.4 + SD Card Breakout + A4988 Driver + 2004LCD with Controller + MEGA2560 R3 + Mechanical Endstop + Heatbed + Thermistor + 0.5mm Nozzle + Cooler Fan for Arduino

Smart Controller contains a SD-Card reader, an rotary encoder and a 20 Character
x 4 Line LCD display. You can easy connect it to your Ramps board. After
connecting this panel to your Ramps you don’t need your pc any more, the Smart
Controller supplies power for your SD card. Further more all actions like
calibration, axes movements can be done by just using the rotary encoder on the
Smart Controller. Print your 3D designs without PC, just with a g-code design
stored on the SD card.

SainSmart Mechanical Endstop perfect for any 3D printer also for use on CNC
machines and other electronic applications.

SainSmart SD Ramps: Breakout board for the microSD socket that is not much
bigger than your fingernail. Compatible with the SPI interface found on any SD
card, this tiny form factor was created for cell phone storage and is perfect
for your next 3D printer project! Board comes fully assembled and tested.The
bare socket is available.

SainSmart Heatbed MK2,Borosilicate Glass, Aluminium Bed Mount Plate is the
latest and the best type of heatbed money can buy as of today. 100% compatible
with all Prusa and Mendel 3d printer variants. (We will provide you another two
100K ohm thermistor as a gift.

Package Content:

1 x RAMPS 1.4
1 x Mega 2560 R3
5 x A4988 driver
1 x LCD2004 With Controller
1 x SD card breakout For ramps
2 x Cooler Fan for 3D ramps
6 x Mechanical Endstop with cable
1 x RAMPS 1.4 wiring cable
1 x Heatbed MK2b
2 x thermistor For headbed(100K ohm)
1 x Borosilicate Glass
1 x Aluminium Bed Mount Plate
5 x NEMA 17 Stepper Motors
1 x Assembled J-head Hotend Nozzle.
5 x GT2 20T Aluminum Pulley
1 x GT2 Timing Belt
1 x USB Cable

Note: If you need any technical support of instructions, please contact our customer service.

Product Features

  • Sainsmart A4988 driver is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu; we therefore recommend careful reading of the A4988 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil. We will provide you additional heat sink for you as a gift.
  • Sainsmart Mega2560 R3 is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. Arduino development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works.
  • Sainsmart RAMPS 1.4 is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces a Mega with the powerful MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on a MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. This board is mostly based on Adrian’s Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by Vik. Also inspired by Vik’s work with EasyDrivers. circuit design based mostly on Adrian’s Pololu_Electronics Joaz at RepRapSource.com supplied initial pin definitions and many design improvements. Much inspiration, suggestions, and ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap community.

Visit The Website For More Information…

FbscTech 3D Printer Heated Bed Mount Plate Aluminium Drill 220*220*3mm for Reprap MK2 Heatbed

FbscTech 3D Printer Heated Bed Mount Plate Aluminium Drill 220*220*3mm for Reprap MK2 Heatbed

Description :
3D heat bed Board,opposite has completed the drilling of aluminum 3mm thick,thermal equilibrium
Size : 220x220x3mm

Packing List:
1 x 220*220*3mm aluminum board
Warm Tips: Please check both the model and picture before placing order.

Product Features

  • Size: 220x220x3mm
  • Heated Bed Mount Plate Aluminium Drill

Detailed Information available on our Homepage…

SainSmart Megatronics + A4988 + Heatbed Endstop 3D Printer Kit for Reprap Arduino Mega 2560 UNO R3 (With Motor, 12864LCD)

Sainsmart A4988 driver is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu; we therefore recommend careful reading of the A4988 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil.

SainSmart Megatronics LCD12864 is 100% compaitble with original design .You can
turn on the light time to do long or short form of the adjustment TRIMM R4100K
from 10 seconds to 2 minutesIf you use a print job at night and parts
department, which means that the new modifications LCD backlight would be
suitable for youLED background light control circuit, a small function of
intelligent controller, With pin short time to decide on all LED turn or
steering 30 seconds

SainSmart Mechanical Endstop perfect for any 3D
printer also for use on CNC machines and other electronic applications.

SainSmart SD Ramps: Breakout board for the microSD socket is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next 3D printer project! Board comes fully assembled and tested.The bare socket is available.

MK2B is the latest and the best type of heatbed, compatible with all Prusa and Mendel 3d printer variants.

Package List:

1 x Megatronics board

6 x A4988 driver

1 x LCD 12864 With Controller

3 x Mechanical Endstop with cable

1 x Heatbed MK2B

5 x NEMA 17 Stepper Motors

Note: Documentation for your reference:

https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-029-105/Megatronicsv2TestFirmware.rar

Product Features

  • This is the new SainSmart 3D Printer Starter Kit, developed specially for those beginners who are interested in 3D printer.
  • You will have a complete set of Sainsmart’s most common and useful electronic components.
  • You may learn about Sainsmart through using these basic projects.
  • Sainsmart Mega2560 R3 is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. Arduino development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works.
  • Megatronics is based on many famous open-source products including: Arduino Mega 2560, RAMPS, SD Ramps. Therefor this product is an already proven design. It combines all major features of these board into a single board solution for more reliable 3D-printing. Megatronics has a powerful Atmega2560 processor with 256 kB memory, running at 16Mhz. The board can be connected to a PC using a normal USB cable. It will register as FTDI FT232R device. The board is compatible with the Arduino Mega 2560 and will therefor be easily programmed from the Arduino IDE.

Visit The Website For More Information…

Ramps 1.4 3D Printer Kit Reprap Mega 2560 A4988 LCD PCB heatbed MK2a Endstop


RAMPS 1.4:
It is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
This board is mostly based on Adrian’s Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by Vik. Also inspired by Vik’s work with EasyDrivers. circuit design based mostly on Adrian’s Pololu_Electronics Joaz at RepRapSource.com supplied initial pin definitions and many design improvements. Much inspiration, suggestions, and ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap community.

Mega 2560:
Mega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. Arduino development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works.

Product Features

  • 100% Beand New and Free Shipping by DHL
  • A4988 driver — This product is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu; we therefore recommend careful reading of the A4988 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil.
  • Reprap smart RAMPS1.4 LCD2004 display controller — The Smart Controller gives your 3D printer the possibility to print “stand alone”, without any PC!
  • Mechanical Endstop — Mechanical Endstop perfect for any 3D printer (Including Prusa Mendel i2, Prusa i3, MendelMax, Rostock etc…) also for use on CNC machines and other electronic applications.
  • SD Ramps — Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next 3D printer project! Board comes fully assembled and tested.The bare socket is available.

Visit The Website For More Information…