Generic Reprap 12v 40W Ceramic Cartridge Wire Heater For Arduino 3D Printer of 5pcs

Specification:
Voltage: 12v
Power: 40w
Material: Stainless Steel
Diameter: 6mm
Length: 20mm
Wire Length :1m
Shipping Included:
5PCS*Cartridge Heater

Product Features

  • Voltage: 12v
  • Power: 40w
  • Material: Stainless Steel
  • Diameter: 6mm
  • Length: 20mm

Click Here For More Information

225x225mm 24V Silicone Rubber Heater for 3D Printer Heated Beds

REQUIRES 24v POWER

You are looking at the ultimate heating element for your 3D printer’s bed. This is a premium silicone rubber heater, normally used in industrial environments to heat large tanks of liquid. We had these custom made to be the fastest, most evenly heated elements available. They include a built in 100k thermistor for accurate readings with easy setup. They run off 24v power so no dangerous voltage and they CAN be run directly with some electronics (some electronics may require a relay due to the current draw). We have tested these with a Azteeg X1 and X3 from http://www.panucatt.com as well as the RAMPS 1.4 directly with no problems (YMMV). These heaters are flexible and WILL REQUIRE a flat build surface such as glass to mount to.

  • 225mm x 225mm / 9″x9″
  • Durable Silicone Rubber Construction
  • Extremely Even Distribution of Heat
  • Industrial Duty Cycles For Long Life
  • Heats To 120 Degrees C in About ONE Minute (assuming adequate power supply)
  • Integrated 100k Thermistor For Accurate and Reliable Temperature Readings
  • Integrated Thermistor Beta Value 3950K
  • Thermistor Leads Are Insulated and Ready To Go
  • Draws Up to 8 Amps @ 24v So Make Sure Your Power Supply Can Handle It…a 350W+ or Dedicated 24v Power Supply is Recommended

Product Features

  • Most Even Heating Even to the Edges of All Heater Types
  • Includes Integrated 100K Thermistor (Epcos #1 Table)
  • FLEXIBLE and Requires Build Surface (Basalt, Aluminum, Glass etc.)
  • Adhere with Silicone to Build Surface

Detailed Information available on our Homepage…

Kamo 5PCS Aluminum Heater Block M6 Specialized for Ultimaker Structure 3D Printer Extruder

Specifications:

Material: Aluminum

Size: 25*15*12mm

Net weight: 7g

Inner hole for set screw: M3/M6

Inner hole for heating tube: 6mm

Inner hole for thermocouple: 3mm

Apply: Ultimaker Structure

Package Included:

5 x Aluminum Heater Block

Detailed Information available on our Homepage…

Junyo Aluminum Mini Heater Block Extruder for Makerbot 3D Printer

Descriptions:

It works perfect with brass nozzle and barrels.

It specialized for Makerbot structure of 3D printers.

Aluminium with anodized surface.

Features:
Size:20*20*10mm
Accept Nozzle with M6 threads.
Inner hole for heater tube: 6mm
Inner hole for thermocouple/thermistor: 3mm
Inner hole for set screw: M3
Package: Quantity: 5 pcs Heater Aluminium Block

Click Here For More Information