[Sintron] 3D Printer Controller Kit RAMPS 1.4 + Mega 2560 R3 + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter For Arduino RepRap

Overview

(1) 3D Printer Controller RAMPS 1.4

It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion.

for more informations, you can check here : http://www.amazon.com/gp/product/B00JU41GQ4

(2) Mega 2560 R3

for more informations, you can check here : http://www.amazon.com/gp/product/B00E94CGTQ

(3) A4988 Stepper Motor Driver

A4988 is a complete microstepping motor driver with built-in translator for easy operation

for more informations, you can check here : http://www.amazon.com/gp/product/B00JXGT1G6

(4) LCD 12864 Graphic Smart Display Controller

This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the “smart adapter” included.

for more informations, you can check here : http://www.amazon.com/gp/product/B00L72FAZU

Package List

(1) RAMPS 1.4 x 1

(2) Mega 2560 R3 x 1

(3) A4988 Stepper Motor Driver with Heatsink x 5

(4) LCD 12864 Graphic Smart Display Controller x 1

(5) Smart Adapter x 1

(6) 30cm Cable x 2

(7) USB Cable x 1

(8) Storage Box x 1

Here is the firmware for you to use with Ramps 1.4 https://www.dropbox.com/s/56qbizg7l56k2lw/Marlin-Marlin_v1%20for%20lcd%2012864.zip Marlin for ramps 1.4 + A4988 stepper driver + LCD 12864 controller

Product Features

  • (1) 3D Printer Controller RAMPS 1.4 x 1
  • (2) Arduino-Compatible Mega 2560 R3 With USB Cable x 1
  • (3) A4988 Stepper Motor Driver With Heatsink x 5
  • (4) LCD 12864 Graphic Smart Display Controller Kit x 1
  • (5) Storage Box x 1

Click Here If You Need More Detailed Info…

[Sintron] 3d Printer Kit , Ramps 1.4 + Mega 2560 + 5pcs A4988 Stepper Driver w/ Heatsink + LCD 12864 Smart Controller + 3 Pcs End Stop + Mk2b Heat Bed + 2 Pcs Pulley + 2m Gt2 Belts for Reprap Prusa I3 Etc..

Overview

this kit includes all the electronic device you need to build your own 3D printer . and during this process , we are sure you might meet some technical questions , we also offer very good after-sale technical consult . we not just sell , but also are very professional with what we sell. so please feel free to send us an email with any questions.

we also provide necessary firmware and software for this . after you purchase , please contact us for it .

(1) RAMPS 1.4 x1

(2) Mega 2560 R3 + USB Cable x1

(3) A4988 Stepper Motor Driver with Heatsink x5

(4) LCD 12864 Smart Controller x1

(5) MK28 Heated Bed with Thermistor and High Temp Wire x1
(6) Mechanical Endstops x3

(7) 2m GT2 Belts

(8) 20 tooth Pulley x3

(9) Smart Adapter x1

(10) 30cm Cable x2

(11) Storage Box x1

Product Features

  • (1) 3D Printer Controller RAMPS 1.4 x 1 + Mechanical Endstops x 3
  • (2) Arduino-Compatible Mega 2560 R3 With USB Cable x 1
  • (3) A4988 Stepper Motor Driver With Heatsink x 5
  • (4) LCD 12864 Graphic Smart Display Controller Kit x 1
  • (5) MK28 Heated Bed with Thermistor and High Temp Wire x 1

Click Here If You Need More Detailed Info…

Geeetech 3D Printer RepRap Kits-RAMPS1.4 Shield,Mega2560,Smart LCD2004/LCD12864 Display with Pololu stepper motor driver & Heatsink & Cooler Fan… (A4988 & Rectangle LCD12864 KIT)

Package List

1 x RAMPS 1.4

1 x Mega2560 Board

5 x A4988 Stepper Driver

5 x Heatsink

2 x Heatsink sticker

1 x USB cable

1 X Rectangle LCD12864 with adaptor for RAMPS1.4

1 X SD module for RAMPS1.4

1 X 40x40mm 3pin cooler fan

3 X Mechanical endstop

5 X 70cm 2pin Female-to-Female jumper cable

5 X 70cm 3pin Female-to-Female jumper cable

5 X 70cm 4pin Female-to-Female jumper cable

1. LCD12864 Display

This item contains a SD-Card reader, an rotary encoder and a 128 Character x 64 Line LCD display. Added a small function which is LED backgroud light control circuit to smart controller, with shorting the pins to decide the LED turn on all the time or turn on 30 seconds and than turn off automaticly.IF you used to start the printing jobs at night and get the parts at the next morning , that means with the new modification LCD back light will not annoying you any more ,you can make the time of light turn on longer or shorter by adjust the TRIMM R4 100K form 10s to 2mins.

2.A4988 driver

This product is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu; we therefore recommend careful reading of the A4988 datasheet before using this product.

3.Heatsink

The 11x11x5mm heatsink is for StepStick stepper drivers.

4.SD Breakout for RAMPS

Ever wanted to run your RepRap from SD card? Here is your chance! This RAMPS add-on enables you to print from MicroSD.With RAMPS 1.3 and higher it’s easily connected to the RAMPS board.

Visit The Website For More Information…

Copper Heatsink Cooling Kit Easy Install For Raspberry Pi

Description : 1PC Copper Heatsink Cooling Kit Easy Install for Raspberry Pi A Pure Copper Heatsink to keep your Pi Cool Pure copper Heatsink For Raspberry Pi -than aluminum effect much better. With Self-adhesive thermal transfer for easy application. Not Need to use fans to cool your Raspberry Pi Specifications: Dimensional : 13mm x 12mm x 5mm Material : Copper Optional accessories : PI controller- mini wireless mouse and keyboard- pi7 inch LCD screen- pi system of SD card- AV video line Package included : 1 x Heat Sink (12mm x 13mm x 5mm) (With Self-adhesive) Details pictures :

Product Features

  • Package includes one item

Click Here If You Need More Detailed Info…