IC3D 120mm (4.7″) Wide 10M Long Kapton (Polyimide) Tape for 3D Printer platforms

This is a 120mm (4.7″) wide by 22M long roll of Kapton tape (Polyimide). Enough to cover about 50 8×8″ glass sheets. We prefer this size since it’s easier to apply than full width sheets. Printing over heated Kapton taped glass allows for excellent adhesion of melted plastic and gives the bottom of your print a nice smooth finish. After many hours of printing, refresh your printing surface with this stuff. This tape can handle temperatures of up to about 280C. We’ve tested tape from several different manufacturers and chose the best. *** APPLICATION TIP: To minimize the seam from laying to sides down, just spray some lightly soaped water onto the glass and tape. Lay the first side down, slide to position, then squeegee the water out.

Price:

Read More

IC3D 3mm PLA 3D Printer Filament 2lb Black – MADE IN USA

IC3D® – For 3D Printers, By 3D Printers (TM) Spend more time printing with high-quality 3D printer filament from IC3D®. IC3D® extrudes 3D printer filament in-house in Ohio, USA. Strict production standards for cleanliness and tolerance specifications ensure the diameter is within +/- 0.10mm and ovality (roundness) is within 4%. Quality is the top priority as each spool is hand checked, vacuum sealed with desiccant, and packaged. IC3D® filament is extensively tested with success on a variety of mainstream desktop 3D printers utilizing various extruder designs and hot-end styles. Every spool of IC3D® filament is backed by a 100% SATISFACTION GUARANTEE.

Product Features

  • 2lb of 3mm PLA 3D printer filament
  • Filament diameter is 2.90mm +/-0.10, ovality (roundness) is within 4% and weight is 2.1lb +/- 0.1
  • Printing temperature range is 190 – 200C
  • Made in the USA under strict quality standards
  • Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A

Check Out Our Website For Details…

IC3D 1.75mm ABS 3D Printer Filament 2lb Blue – MADE IN USA

IC3D® – For 3D Printers, By 3D Printers (TM)
Spend more time printing with high-quality 3D printer filament from IC3D®. IC3D® extrudes 3D printer filament in-house in Ohio, USA. Strict production standards for cleanliness and tolerance specifications ensure the diameter is within +/- 0.10mm and ovality (roundness) is within 4%. Quality is the top priority as each spool is hand checked, vacuum sealed with desiccant, and packaged. IC3D® filament is extensively tested with success on a variety of mainstream desktop 3D printers utilizing various extruder designs and hot-end styles. Every spool of IC3D® filament is backed by a 100% SATISFACTION GUARANTEE.

Product Features

  • 2lb of 1.75mm ABS 3D printer filament
  • Filament diameter is 1.75mm +/-0.10, ovality (roundness) is within 4% and weight is 2.1lb +/- 0.1
  • Printing temperature range is 220 – 230C
  • Made in the USA under strict quality standards
  • Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A

Click Here If You Need More Detailed Info…

IC3D 3mm ABS 3D Printing Filament 2lb Blue – MADE IN USA

***IC3D is now extruding our own filament in-house!*** 100% USA manufactured 3mm ABS 3D printing filament. Filament diameter is 2.9mm +/- 0.10mm. Strict production standards for cleanliness and tolerance specification ensure absolute top quality and consistent diameter. Proven results through extensive testing on several mainstream desktop 3D printers utilizing a variety of extruder designs and hot-end styles; we confidently provide every spool of filament with a 100% SATISFACTION GUARANTEE. Recommended printing temperature range is calibrated 220 – 230C. Every spool is quality checked, and sealed with desiccant in a heavy poly-bag to keep your filament clean and dry during storage. IC3D For 3D Printers, By 3D Printers (TM)

Product Features

  • 2lb of 3mm ABS 3D Printer Filament
  • Filament comes on a sturdy plastic spool, in a thick vacuum sealed package with desiccant.
  • Filament Diameter is 2.9mm +/-0.10. Filament Weight is 2.1lb +/- 0.1. Printing temperature range is 220 – 230C.
  • Extruded by IC3D Printers in Ohio, USA – IC3D only makes product for the 3D printing industry
  • Compatible with the following 3D printers: Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A

Check Out Our Website For Details…