IC3D 120mm (4.7″) Wide 10M Long Kapton (Polyimide) Tape for 3D Printer platforms

This is a 120mm (4.7″) wide by 22M long roll of Kapton tape (Polyimide). Enough to cover about 50 8×8″ glass sheets. We prefer this size since it’s easier to apply than full width sheets. Printing over heated Kapton taped glass allows for excellent adhesion of melted plastic and gives the bottom of your print a nice smooth finish. After many hours of printing, refresh your printing surface with this stuff. This tape can handle temperatures of up to about 280C. We’ve tested tape from several different manufacturers and chose the best. *** APPLICATION TIP: To minimize the seam from laying to sides down, just spray some lightly soaped water onto the glass and tape. Lay the first side down, slide to position, then squeegee the water out.

Price:

Read More

10 Pack: 8″ x 8″ x 2mil 3DXTech Polyimide Tape Sheets Kapton for 3D Printer Platforms

3DXTech Polyimide Tape Sheets: 10 Pack of 2mil sheets of 3DXTech Polyimide Tape offers an excellent print surface for 3D Printer Platforms. The polyimide tape is 2mil thick (0.05mm) with Silicone Adhesive and a PET release liner. This tape provides a smooth heat-resistant surface that easily removes once you have finished your print. Polyimide Tape offers excellent electrical insulation, high temperature resistance, and high voltage resistance. Suitable for use on Makerbot Replicator, Ultimaker, Prinrbot, Reprap, Mendel, Prusa, Up! Printers, Solidoodle as well as most other 3D Printers.

Product Features

  • Polyimide Substrate: 2mil (.002″)
  • Length: 8″
  • Width: 8″
  • Temp Range: up to 250C

Detailed Information available on our Homepage…

Spool3d Kapton (Polyimide) Tape 6″ X 100′ for 3d Printer Platform: Pack of 2

Top of the line Kapton Tape for 3D Printer Platform 6″ x 100′ (15.2cm x 30.5m). It is designed to work with most print surfaces to help reduce warping during the print. This high temperature polyimide film provides a superior build platform solution. Kapton is the best choice because of its adhesion at full temperature & self releasing characteristics as the print cools. Comes in a pack of two.

Product Features

  • Two rolls of Kapton Tape per purchase.
  • Top of the line Kapton Tape for 3D Printer Platform 6″ x 100′ (15.2cm x 30.5m).
  • his polyimide film is heat resistant and provides a superior build platform solution.
  • Kapton is the best choice because of its superb adhesion at full temperature & self releasing characteristics as the print cools.
  • Polyimide film with silicon adhesive for easy release.

Visit The Website For More Information…

1 Mil Kapton Tape – 7″ x 36 yds / 3D Printer Platform (Polyimide)

1Mil Kapton tape is developed by Dupont which is a HN general purpose film with silicon adhesive. Kapton® polyimide films shows excellent electrical insulation properties, high temperature resistant, and excellent solvent resistant. Kapton tape combines excellent physical, electrical, and mechanical properties, and has been used in applications at temperatures as low as -273°C (-459°F) and as high as 400°C (752°F).

Technical Data Sheet:

Color: Amber
Adhesion Type: Silicone
Film Thickness: 1.2 Mil
Adhesive Thickness: 1.5Mil
Total Thickness: 2.7 Mil
Adhesion to Steel: 25 oz//inch
Tensile Strength: 30 (lbs/inch)
Elongation: >40 %
Dielectric Strength: 8,000 volts
UL-94 Flammability Rating: V-0
Insulation Resistance: 1,000,000 mega ohms
Electrolytic Corrosion Factor: 1
Insulation Class centigrade: 180°C
Temperature Resistance: 260°C (500°F)
Resistance to acids, oils, solvents: Excellent
Length: 36 yards

Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product’s suitability for a particular application.

Kapton® is a registered trademark of DuPont

Product Features

  • 1 Mil Polyimide Tape (Kapton®) RoHS compliant
  • 1 Mil Polyimide Tape is silicon adhesive protection leaves no residue.
  • 1 Mil Polyimide Tape is thin and conformable enabling masking of uneven surface
  • 1 Mil Polyimide Tape shows excellent electrical insulation.
  • 1 Mil Polyimide Tape maintains high temperature resistance as high as 400F.

Detailed Information available on our Homepage…