[Sintron] 3D Printer Controller Kit RAMPS 1.4 + Mega 2560 R3 + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter For Arduino RepRap

Overview

(1) 3D Printer Controller RAMPS 1.4

It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion.

for more informations, you can check here : http://www.amazon.com/gp/product/B00JU41GQ4

(2) Mega 2560 R3

for more informations, you can check here : http://www.amazon.com/gp/product/B00E94CGTQ

(3) A4988 Stepper Motor Driver

A4988 is a complete microstepping motor driver with built-in translator for easy operation

for more informations, you can check here : http://www.amazon.com/gp/product/B00JXGT1G6

(4) LCD 12864 Graphic Smart Display Controller

This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the “smart adapter” included.

for more informations, you can check here : http://www.amazon.com/gp/product/B00L72FAZU

Package List

(1) RAMPS 1.4 x 1

(2) Mega 2560 R3 x 1

(3) A4988 Stepper Motor Driver with Heatsink x 5

(4) LCD 12864 Graphic Smart Display Controller x 1

(5) Smart Adapter x 1

(6) 30cm Cable x 2

(7) USB Cable x 1

(8) Storage Box x 1

Here is the firmware for you to use with Ramps 1.4 https://www.dropbox.com/s/56qbizg7l56k2lw/Marlin-Marlin_v1%20for%20lcd%2012864.zip Marlin for ramps 1.4 + A4988 stepper driver + LCD 12864 controller

Product Features

  • (1) 3D Printer Controller RAMPS 1.4 x 1
  • (2) Arduino-Compatible Mega 2560 R3 With USB Cable x 1
  • (3) A4988 Stepper Motor Driver With Heatsink x 5
  • (4) LCD 12864 Graphic Smart Display Controller Kit x 1
  • (5) Storage Box x 1

Click Here If You Need More Detailed Info…

5PCS Nema 17 Stepper Motor Bipolar 2A 84oz.in 48mm 4-lead for 3D Printer/CNC

This is high torque Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution).

Each phase draws 2A, allowing for a holding torque of 59Ncm(83.6oz.in). It’s very good choice for 3D printer.

Electrical Specification:

* Manufacturer Part Number: 17HS19-2004S

* Motor Type: Bipolar Stepper

* Step Angle: 1.8 deg.

* Holding Torque: 59Ncm(83.6oz.in)

* Rated Current/phase: 2.0A

* Phase Resistance: 1.4ohms

* Inductance: 3.0mH+/-20%(1KHz)

Physical Specification:

* Frame Size: 42 x 42mm

* Body Length: 47mm

* Shaft Diameter: 5mm

* Shaft Length: 19.5mm

* D-cut Length: 19.5mm

* Number of Leads: 4

* Lead Length: 225mm

* Weight: 390g

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.

Connecting the motor directly to a power supply will destroy the motor.

Product Features

  • 5pcs/ Package
  • 59Ncm(83.6oz.in) holding torque
  • NEMA 17 bipolar 1.65″x1.65″x1.85″ 4-wire
  • 1.8 deg. step angle(200 steps/rev)
  • Rated current 2.0A & resistance 1.4ohms

Visit The Website For More Information…

Servo Motor for Encad NovaJet 500 600 630 700 736 750 T-200 PRO 42e 60e CadJet 3D

Servo Motor for Encad NovaJet 500 600 630 700 736 750 T-200 PRO 42e 60e CadJet 3D

Product Features

  • Product: Servo Motor for Encad NovaJet 500 600 630 700 736 750 T-200 PRO 42e 60e CadJet 3D
  • Part Number: 222809-00

Visit The Website For More Information…

Sunwin 3d Printer Parts Trprap Makerbot DIY Mk8 Direct Drive Extruder Kit Stepper Motor

Hybrid Stepper Motor Specifications:

Weight: 0.6kg

Step angle:1.8±5%

Phase No.: 2

Insulation resistance: 100MOhm(500V DC)

Insulation class: B

Voltage: 3.6v

Current: 1.5A

Inductance: 6.0±20%mH

Resistance: 2.4 ± 10%Ω

Holding torque: 7.0kg.cm

What is in box ?

1 x 3D Printer Parts Trprap Makerbot DIY MK8 Direct Drive Extruder kit/set With Stepper Motor For Extruder with 700mm Tube

Product Features

  • Step angle:1.8±5%
  • Phase No.: 2
  • Insulation resistance: 100MOhm(500V DC)
  • Insulation class: B
  • Voltage: 3.6v

Click Here If You Need More Detailed Info…