5PCS Nema 17 Stepper Motor Bipolar 2A 84oz.in 48mm 4-lead for 3D Printer/CNC

This is high torque Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution).

Each phase draws 2A, allowing for a holding torque of 59Ncm(83.6oz.in). It’s very good choice for 3D printer.

Electrical Specification:

* Manufacturer Part Number: 17HS19-2004S

* Motor Type: Bipolar Stepper

* Step Angle: 1.8 deg.

* Holding Torque: 59Ncm(83.6oz.in)

* Rated Current/phase: 2.0A

* Phase Resistance: 1.4ohms

* Inductance: 3.0mH+/-20%(1KHz)

Physical Specification:

* Frame Size: 42 x 42mm

* Body Length: 47mm

* Shaft Diameter: 5mm

* Shaft Length: 19.5mm

* D-cut Length: 19.5mm

* Number of Leads: 4

* Lead Length: 225mm

* Weight: 390g

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.

Connecting the motor directly to a power supply will destroy the motor.

Product Features

  • 5pcs/ Package
  • 59Ncm(83.6oz.in) holding torque
  • NEMA 17 bipolar 1.65″x1.65″x1.85″ 4-wire
  • 1.8 deg. step angle(200 steps/rev)
  • Rated current 2.0A & resistance 1.4ohms

Visit The Website For More Information…

Geared Stepper Motor 8mm Shaft Kysan 5.2:1 Planetary 3D Printer RepRap Kossel Prusa Nema 17

Geared Stepper Motor Kysan 5.2:1 Planetary 3D Printer RepRap Kossel Prusa Nema 17

Product Features

  • 42 mm, Gear Ratio: 5.2:1, 20 mm long, 8 mm Shaft with D Cut, Step Angle: 1.8°
  • 1830 mm Wire Connector
  • Rated Voltage: 2.6V, Rated Current: 1A
  • 2 Phase, Inductance per Phase: 3.2mH, Resistance per Phase 2.6 Ohms
  • Holding Torque: 9Kg.cm, Class B Insulation

Visit The Website For More Information…

SainSmart NEMA 17 Stepper Motor 1.5A-2.5A for 3D Printer Reprap Makerbot Prusa CNC Router

SainSmart NEMA 17 Stepper Motor 1.5A-2.5A for 3D Printer Reprap Makerbot Prusa CNC Router

Product Features

  • SainSmart NEMA 17 Stepper Motor 1.5A-2.5A for 3D Printer Reprap Makerbot Prusa CNC Router

Detailed Information available on our Homepage…

Nema 17 Bipolar Stepper Motors RepRap DIY 3D Printer Parts 5.5 kg-cm 76oz-in (Pack of 3)

(3) Kysan Electronics NEMA 17 Stepper Motors.
Ideal for 3D Printer. Mfg: 42BYGH4803-DC.
Kysan Electronics SKU: 1124090

Product Features

  • High Torque: 5.5 kg-cm, 53.9 N-cm, 76 oz-in, 4.77 lb-in
  • 4.2 Volt, 1.5 Amp, 1.8 deg per step
  • 21 mm long, 5 mm Shaft with D Cut
  • 2 Phase, Resistance per Phase 2.8 Ohms
  • 200 Steps per Revolution, Inductance 4.8 mH, Class B Insulation

Visit The Website For More Information…