3d Printer Build Platform Tape for Printrbot

Our Printrbot 3D printer tape is made in the USA and easy to install. No more worrying about PLA not sticking to the platform while you print. 6 inches wide (just like your build platform) so no seam either.. This tough tape is great for multiple prints, and easy to replace, and leaves no residue. A more affordable, cleaner, and easier option than Kapton tape. 180 feet of 3D printer tape, enough tape to cover your platform 90 times, that’s less than 35 cents per use, compare that with similar products at nearly $2 per sheet.

Product Features

  • Perfect for PLA
  • Easily Applies to Build Platform
  • 6 inches wide, No Seam, No Air Pockets on build platform
  • Much cleaner and easier than Kapton
  • Better than 3M 2090 Painter’s Tape

Detailed Information available on our Homepage…

3D Printer Build Platform Tape for Dremel Idea Builder

Fifty Percent Fill’s 3d Printer Build Platform Tape for Dremel Idea Builder

Our Dremel Idea Builder printer tape is made in the USA and easy to install. No more worrying about PLA not sticking to the platform while you print. 6 inches wide (just like your build platform) so no seam either.. This tough tape is great for multiple prints, and easy to replace, and leaves no residue. A more affordable, cleaner, and easier option than Kapton tape. 180 feet of 3D printer tape, enough tape to cover your platform 90 times, that’s less than 35 cents per use, compare that with similar products at nearly $2 per sheet. Need something you dont see? or having trouble printing something particular? Shoot us an email! Proud to be an American Company.

Product Features

  • Perfect for PLA
  • 6 inches wide, No Seam, No Air Pockets on build platform
  • Easily Applies to Build Platform
  • Much cleaner and easier than Kapton
  • Better than 3M 2090 Painter’s Tape

Visit The Website For More Information…

Spool3d Kapton (Polyimide) Tape 6″ X 100′ for 3d Printer Platform: Pack of 2

Top of the line Kapton Tape for 3D Printer Platform 6″ x 100′ (15.2cm x 30.5m). It is designed to work with most print surfaces to help reduce warping during the print. This high temperature polyimide film provides a superior build platform solution. Kapton is the best choice because of its adhesion at full temperature & self releasing characteristics as the print cools. Comes in a pack of two.

Product Features

  • Two rolls of Kapton Tape per purchase.
  • Top of the line Kapton Tape for 3D Printer Platform 6″ x 100′ (15.2cm x 30.5m).
  • his polyimide film is heat resistant and provides a superior build platform solution.
  • Kapton is the best choice because of its superb adhesion at full temperature & self releasing characteristics as the print cools.
  • Polyimide film with silicon adhesive for easy release.

Visit The Website For More Information…

1 Mil Kapton Tape – 7″ x 36 yds / 3D Printer Platform (Polyimide)

1Mil Kapton tape is developed by Dupont which is a HN general purpose film with silicon adhesive. Kapton® polyimide films shows excellent electrical insulation properties, high temperature resistant, and excellent solvent resistant. Kapton tape combines excellent physical, electrical, and mechanical properties, and has been used in applications at temperatures as low as -273°C (-459°F) and as high as 400°C (752°F).

Technical Data Sheet:

Color: Amber
Adhesion Type: Silicone
Film Thickness: 1.2 Mil
Adhesive Thickness: 1.5Mil
Total Thickness: 2.7 Mil
Adhesion to Steel: 25 oz//inch
Tensile Strength: 30 (lbs/inch)
Elongation: >40 %
Dielectric Strength: 8,000 volts
UL-94 Flammability Rating: V-0
Insulation Resistance: 1,000,000 mega ohms
Electrolytic Corrosion Factor: 1
Insulation Class centigrade: 180°C
Temperature Resistance: 260°C (500°F)
Resistance to acids, oils, solvents: Excellent
Length: 36 yards

Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product’s suitability for a particular application.

Kapton® is a registered trademark of DuPont

Product Features

  • 1 Mil Polyimide Tape (Kapton®) RoHS compliant
  • 1 Mil Polyimide Tape is silicon adhesive protection leaves no residue.
  • 1 Mil Polyimide Tape is thin and conformable enabling masking of uneven surface
  • 1 Mil Polyimide Tape shows excellent electrical insulation.
  • 1 Mil Polyimide Tape maintains high temperature resistance as high as 400F.

Detailed Information available on our Homepage…