SainSmart LCD 12864 with Controller contains a SD-Card reader, an rotary
encoder and a 128 Character x 64 Line LCD display. You can easy connect it to
your Ramps board using the “smart adapter” included. After connecting this panel
to your Ramps you don’t need your pc any more, the Smart Controller supplies
power for your SD card. Further more all actions like calibration, axes
movements can be done by just using the rotary encoder on the Smart Controller.
Print your 3D designs without PC, just with a g-code design stored on the SD
SainSmart Mechanical Endstop perfect for any 3D printer also for use on CNC machines and other
SainSmart SD Ramps: Breakout board for the microSD socke
Parts needed to assemble rods for a 3D printer
The New, FlashForge Creator Pro replaces the popular Creator X in the FlashForge lineup of dual extruders 3D printers. It boasts the same proven design, sturdy metal frame, optimized build platform,
full manufacturer’s warranty fulfilled by Flashforge Amazon, and lifetime support provided by expert FlashForge Amazon technicians. And adds: a transparent cover that effectively seals the chamber from outside interference; an integrated LCD screen and button board; and more…
Key features and improvements:
1. Sturdy metal frame is substantially more stable than the Creator’s original wood frame..
2. Warp-resistant 6.3mm aluminum build platform remains perfectly level under the stress of high heat.
This is a 120mm (4.7″) wide by 22M long roll of Kapton tape (Polyimide). Enough to cover about 50 8×8″ glass sheets. We prefer this size since it’s easier to apply than full width sheets. Printing over heated Kapton taped glass allows for excellent adhesion of melted plastic and gives the bottom of your print a nice smooth finish. After many hours of printing, refresh your printing surface with this stuff. This tape can handle temperatures of up to about 280C. We’ve tested tape from several different manufacturers and chose the best. *** APPLICATION TIP: To minimize the seam from laying to sides down, just spray some lightly soaped water onto the glass and tape. Lay the first side down, slide to position, then squeegee the water out.