3d Printer Build Platform Tape for Printrbot

Our Printrbot 3D printer tape is made in the USA and easy to install. No more worrying about PLA not sticking to the platform while you print. 6 inches wide (just like your build platform) so no seam either.. This tough tape is great for multiple prints, and easy to replace, and leaves no residue. A more affordable, cleaner, and easier option than Kapton tape. 180 feet of 3D printer tape, enough tape to cover your platform 90 times, that’s less than 35 cents per use, compare that with similar products at nearly $2 per sheet.

Product Features

  • Perfect for PLA
  • Easily Applies to Build Platform
  • 6 inches wide, No Seam, No Air Pockets on build platform
  • Much cleaner and easier than Kapton
  • Better than 3M 2090 Painter’s Tape

Detailed Information available on our Homepage…

RioRandâ„¢ RepRap ABS Filament 1.75mm 1kg(2.2lbs)/roll for 3D Printer, Reprap, MakerBot, Afinia, UP!, Solidoodle 2, Printrbot LC, MakerGear M2 Static Dissipative (Red)

Powered by RioRand advanced technology

3D printer has been used by designers, engineers and scientists to produce the disposable mechanical products and model, and it is already widely used in health care, education, toys, building, automobile, electronics, and anime field.
ABS is one of the most commonly used engineering plastics, it’s a recommended material for beginners by RepRap because of the loose temperature requirement during extrusion process and often used in electronic, electrical, automotive, household and etc… ABS is one of most welcomed material for 3D printe.

Advantages of ABS Plastic Include:
? High impact strength even at low temperatures
? Easy processing
? Low heat conductivity
? Resistant to corrosion and abrasion
? Non-toxic, no halogens
? Smooth surface finish
? Light weight
? Recyclable

Product Features

  • Powered by RioRand advanced technology
  • RioRand(TM) RepRap ABS Filament 1.75mm 1kg(2.2lbs)/roll for 3D Printer, Reprap, MakerBot, Afinia, UP!, Solidoodle 2, Printrbot LC, MakerGear M2

Detailed Information available on our Homepage…

Printrbot Go Large Fully Assembled 3D Printer, 24″ x 12″ x 12″ Maximum Build Dimensions, 100 Micron Resolution, 1.75-mm ABS and PLA Filament

The Printrbot Go Large Fully Assembled 3D fused-filament-fabrication printer with triple extruders is designed for portability and has an open platform for fabricating parts up to 24 x 12 x 12 inches (H x W x D) using three 1.75-mm ABS or PLA filaments (sold separately). The printer has a wood frame that folds into a compact, portable box with handle for transport or storage. Collapsing the frame for transport does not require dismantling any parts, and the hard shell protects all internal components. The triple extruder enables printing in three colors or materials, including water-soluble PLA for temporary support structures in a printed part. The printer head moves on the X (left to right) axis and Z (up and down) axes, while the bed moves on the Y (backward and forward). The printer uses open source software and connects to the computer using the included micro-USB cable. The integrated Raspberry Pi single-board computer allows computers, tablets, and capable phones to connect remotely to the printer over Wi-Fi and control the print job. The printer accepts a battery (sold separately) for use when a power outlet is not available.

The print table is machined-flat MIC 6 aluminum cast plate and includes an auto-leveling probe that works with the user-chosen computer software to provide a level print surface. The guide rails have a 12-mm diameter for stability and dual NEMA 17 motors with linear bearings for smooth vertical movement of the print head. The GT2 belt and aluminum pulley system facilitates precise movement of the print head. The hot end has a maximum resolution of 100 microns and includes a shrouded fan to help solidify the molten material by directing air toward it as it is extruded onto the print table. The printer includes two sample lengths of PLA (polylactic acid) filament.

Compatible filament material ABS, PLA
Filament size 1.75 mm
Maximum hot-end temperature 270 degrees Celsius (518 degrees F)
Maximum resolution 100 microns
Maximum build volume 14.96 gallons
Maximum build dimensions 24 x 12 x 12 inches (H x W x D)*
Heated or ambient bed Ambient
Connection Micro-USB (included), micro-SD card (included)
Untethered printing Yes. Wi-Fi connection requires Octoprint software. Micro-SD card use requires micro-USB cord to start print job before untethering.
Supported operating system(s) Mac, Windows, Linux
Software Open Source. Repetier-Host with Slic3r or Cura recommended.
Input format Stl, g-code
Nozzle diameter 0.4 mm
Power requirements 12 VDC
Overall dimensions before setup 39 x 36 x 13 inches (H x W x D)*
Overall dimensions after setup 39 x 36 x 24 inches (H x W x D)*
Weight 68 lb.

*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Fused filament fabrication printers build prototypes and parts directly from computer-aided-design (CAD) data sources by stacking layers upon layers of molten material. The print material is provided in filament or wire form and is fed through an extruder within the print head, similar to how ink is used in a standard printer. A printer with a single extruder can print using one filament at a time; a printer with dual extruders can print with two different materials or colors at the same time. The thickness of the printed layers can be customized for each print, but the thinnest layer that a printer can lay is called its maximum resolution. Choosing to print using very thin layers will create parts with more detail, but will typically take longer to print. To lay the material in the correct way, the print head and bed typically move in a combination of X-axis (left and right), Y-axis (forward and backward), and Z-axis (up and down) movement.

Printrbot manufactures desktop 3D printers and accessories. The company is headquartered in Lincoln, CA.

What’s in the Box?

  • Printrbot Go Large printer (assembled)
  • ATX power supply
  • Power cord (36″ length)
  • Micro-USB cable (36″ length)
  • Wi-Fi dongle
  • Micro-SD card with standard SD adapter
  • Spool rack (unassembled)
  • (3) Sample lengths of 1.75-mm PLA plastic filament
  • Hardware

Product Features

  • Fabricates parts up to 24 x 12 x 12 inches (H x W x D) in size or 14.96 gallons in volume
  • Prints layers up to a maximum resolution of 100 microns
  • Fabricates parts using 1.75-mm ABS or PLA filament (sold separately)
  • Folding design with handle enables transport and storage without dismantling the printer
  • Triple extruder can print simultaneously in three colors or materials

Visit The Website For More Information…

Upgrade kit for the Printrbot Simple XL

Great upgrade kit for Printrbot Simple 3D printer

Product Features

  • Expands the Printrbot Simple maximum build dimensions to 185 x 100 x 165 mm (7.2 x 4 x 6.5 inches)
  • Extra-large 6061 aluminum print bed is warp resistant and accepts the larger print sizes
  • For use with the wood-framed version of the Printrbot Simple 3D printer

Click Here If You Need More Detailed Info…