MakerJuice Yellow SF UV 3D Plastic Printing Resin for SLA and DLP Printers (one 500 mL bottle).

Available in White, Black, Red, Yellow, Green, Blue, Unpigmented
SF is a great blend that is just slightly more bendy than G+, while maintaining the fast print speeds and great accuracy. It also has a higher pigment concentration, for more vibrantly opaque parts, and due to the higher viscosity pigment does not settle out as fast. SubSF is perfect for snap-fit parts, or anything that needs to be hard while not being brittle.
SF, like all of our resins, cures under UV A, B, and C light up to around 420nm. You can cure it with a DLP projector, a UV laser, or UV leds. When using UV lasers or LEDs, the cure time is extremely fast, so you don’t need much power.
This resin is low odor and contains zero VOC.
Each batch of resin we make is quality tested to ensure you get the best quality resin, at a great price!

The color has been digitally changed to match the resin color. The “splash” image shows the true resin color. Colors may appear different depending on your monitor settings and and lighting.

Product Features

  • For Printing Rapid Prototypes, Models, Jewelry, or anything else you can imagine.
  • Faster and more precise than prints from filament.
  • Photosetting UV 3D Printing Resin

Check Out Our Website For Details…

MakerJuice Green G+ UV 3D Plastic Printing Resin for SLA and DLP Printers (one 500 mL bottle).

Available in Black, Red, Yellow, Blue, Green, White, Unpigmented

G+ is our general purpose, workhorse resin. It’s extremely hard, easily sanded and painted, and great for all sorts of prints.
G+, like all of our resins, cures under UV A, B, and C light up to around 420nm. You can cure it with a DLP projector, a UV laser, or UV leds. When using UV lasers or LEDs, the cure time is extremely fast, so you don’t need much power.
This resin is low odor and contains zero VOC.
Each batch of resin we make is quality tested to ensure you get the best quality resin, at a great price!
This resin will not effect PLA, but will cause degradation in ABS when uncured.
Images have been digitally changed to match the resin color. The “splash” image shows the true resin color. Colors may appear different depending on your monitor settings and and lighting.

For Printing Rapid Prototypes, Models, Jewelry, or anything else you can imagine.

The Darker green models are their natural color. The lighter Green models and images are real, the color has been digitally changed to match the resin color. The “splash” image shows the true color. Colors may appear different depending on your monitor and lighting.

Product Features

  • For Printing Rapid Prototypes, Models, Jewelry, or anything else you can imagine.
  • Faster and more precise than prints from filament.
  • Photosetting UV 3D Printing Resin

Check Out Our Website For Details…

voxeljet Debuts Phenolic Resin Binder

voxeljet, metal, 3d printing, binder, am, phenolIn a recent announcement voxeljet has debuted a newly developed Phenolic-Direct-Binding method. This new binding method not only offers key advantages for sand printing but also allows for the production of ceramic molds.

The new binder offers a number of advantages for many 3D printing applications, as process engineer Dr. Florian Mögele can attest: “With this binder, we are able to achieve an incredible level of resolution and precision in 3D printing. At the same time, we have also made significant improvements in terms of stability and sand recycling. And: phenolic resin binders are ideally suited for processing ceramic and other materials.”

3D printed, complicated PDB sand molds surpass even the highest expectations. The Phenolic-Direct-Binding method, with its impressive accuracy and increased strength, is setting new trends, especially for complex molds with undercuts, elaborate details and very small radii.

The phenolic resin that is used is not toxic and allows for 100% recycling of non-printed particle material. In contrast to conventional binders, the PDB process does not require silica sand to be pre-treated, which means that it can be easily returned to the sand cycle.

voxeljet expects to offer the new material-set for various printer platforms by the middle of 2015. Until that time, the company will be working on implementing and optimizing the process for relevant printer platforms. Of course, interested parties can also obtain advance information about the performance of the new binder method on the basis of standardized benchmark parts.

MakerJuice Red G+ UV 3D Plastic Printing Resin for SLA and DLP Printers (one 500 mL bottle).

Available in Black, Red, Yellow, Blue, Green, White, Unpigmented

G+ is our general purpose, workhorse resin. It’s extremely hard, easily sanded and painted, and great for all sorts of prints.
G+, like all of our resins, cures under UV A, B, and C light up to around 420nm. You can cure it with a DLP projector, a UV laser, or UV leds. When using UV lasers or LEDs, the cure time is extremely fast, so you don’t need much power.
This resin is low odor and contains zero VOC.
Each batch of resin we make is quality tested to ensure you get the best quality resin, at a great price!

The “splash” image shows the true color of the resin.

G+ cures under UV A, B, and C light up to around 420nm. You can cure it with a DLP projector, a UV laser, or UV leds. When using UV lasers or LEDs, the cure time is extremely fast, so you don’t need much power.

Product Features

  • For SLA and DLP 3D Printers
  • Photo Setting UV Resin
  • Faster and more precise than prints from filament.
  • For Printing Rapid Prototypes, Models, Jewelry, or anything else you can imagine.
  • The “splash” image shows the true color of the resin.

Check Out Our Website For Details…