SainSmart Ramps 1.4 + Mega2560 R3 + LCD12864 + A4988 + 0.4mm J-head Nozzle 3D Printer Kit for Arduino RepRap

SainSmart LCD 12864 with Controller contains a SD-Card reader, an rotary
encoder and a 128 Character x 64 Line LCD display. You can easy connect it to
your Ramps board using the “smart adapter” included. After connecting this panel
to your Ramps you don’t need your pc any more, the Smart Controller supplies
power for your SD card. Further more all actions like calibration, axes
movements can be done by just using the rotary encoder on the Smart Controller.
Print your 3D designs without PC, just with a g-code design stored on the SD
card.

SainSmart Mechanical Endstop perfect for any 3D printer also for use on CNC machines and other
electronic applications.

SainSmart SD Ramps: Breakout board for the microSD socke

Price:$298.00

Read More

SainSmart 3D Printing Kit with RAMPS 1.4 + SD Card Breakout + A4988 Driver + 2004LCD with Controller + MEGA2560 R3 + Mechanical Endstop + Heatbed + Thermistor + 0.5mm Nozzle + Cooler Fan for Arduino

Smart Controller contains a SD-Card reader, an rotary encoder and a 20 Character
x 4 Line LCD display. You can easy connect it to your Ramps board. After
connecting this panel to your Ramps you don’t need your pc any more, the Smart
Controller supplies power for your SD card. Further more all actions like
calibration, axes movements can be done by just using the rotary encoder on the
Smart Controller. Print your 3D designs without PC, just with a g-code design
stored on the SD card.

SainSmart Mechanical Endstop perfect for any 3D printer also for use on CNC
machines and other electronic applications.

SainSmart SD Ramps: Breakout board for the microSD socket that is not much
bigger than your fingernail. Compatible with the SPI interface found on any SD
card, this tiny form factor was created for cell phone storage and is perfect
for your next 3D printer project! Board comes fully assembled and tested.The
bare socket is available.

SainSmart Heatbed MK2,Borosilicate Glass, Aluminium Bed Mount Plate is the
latest and the best type of heatbed money can buy as of today. 100% compatible
with all Prusa and Mendel 3d printer variants. (We will provide you another two
100K ohm thermistor as a gift.

Package Content:

1 x RAMPS 1.4
1 x Mega 2560 R3
5 x A4988 driver
1 x LCD2004 With Controller
1 x SD card breakout For ramps
2 x Cooler Fan for 3D ramps
6 x Mechanical Endstop with cable
1 x RAMPS 1.4 wiring cable
1 x Heatbed MK2b
2 x thermistor For headbed(100K ohm)
1 x Borosilicate Glass
1 x Aluminium Bed Mount Plate
5 x NEMA 17 Stepper Motors
1 x Assembled J-head Hotend Nozzle.
5 x GT2 20T Aluminum Pulley
1 x GT2 Timing Belt
1 x USB Cable

Note: If you need any technical support of instructions, please contact our customer service.

Product Features

  • Sainsmart A4988 driver is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu; we therefore recommend careful reading of the A4988 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil. We will provide you additional heat sink for you as a gift.
  • Sainsmart Mega2560 R3 is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. Arduino development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works.
  • Sainsmart RAMPS 1.4 is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces a Mega with the powerful MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on a MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. This board is mostly based on Adrian’s Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by Vik. Also inspired by Vik’s work with EasyDrivers. circuit design based mostly on Adrian’s Pololu_Electronics Joaz at RepRapSource.com supplied initial pin definitions and many design improvements. Much inspiration, suggestions, and ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap community.

Visit The Website For More Information…

SainSmart Assembled J-head Hotend Nozzle 0.35mm for 1.75mm Nozzle Fitting, 3D Printer Printing Filament Reprap MakerBot Kossel Delta

Removed the heat sink and added a series of vents to provide cooling. To
reduce weight, an aluminum nozzle is used.

This J-Head Hot End is designed based on other nozzle. It’s very simple by
reducing the number of custom machined parts to a bare minimum.

The J-Head Hot End can easily and well interface with the most popular RepRap
extruders. The filament path is same with the one of an already proven design,
it can be used to print reliably with both ABS and PLA. If using PLA, it
requires a small fan to provide air-flow through the cooling vents milled in the
sides of the nozzle holder. Besides, the Hot End has another two advantages.
Heat transmission is more efficiency as there is no thermal junction where a
separate heater screws onto the nozzle. And a resistor is used as a heater.
There is no need to wrap nichrome wire or to bake a heater core.

Features:

* Resistance of resistor 4.7Ω

* Resistor rated power 8W

Product Features

  • This J-Head Hot End is designed based on other nozzle.
  • It’s very simple by reducing the number of custom machined parts to a bare minimum.
  • The J-Head Hot End can easily and well interface with the most popular RepRap extruders.
  • The filament path is same with the one of an already proven design, it can be used to print reliably with both ABS and PLA.
  • Removed the heat sink and added a series of vents to provide cooling. To reduce weight, an aluminum nozzle is used.

Visit The Website For More Information…

SainSmart NEMA 17 Stepper Motor 1.5A-2.5A for 3D Printer Reprap Makerbot Prusa CNC Router

SainSmart NEMA 17 Stepper Motor 1.5A-2.5A for 3D Printer Reprap Makerbot Prusa CNC Router

Product Features

  • SainSmart NEMA 17 Stepper Motor 1.5A-2.5A for 3D Printer Reprap Makerbot Prusa CNC Router

Detailed Information available on our Homepage…