Dremel 3D Printer Supplies – 10 Sheets 6″ x 9.25″ 3M 2090 Painters Tape – Use PLA Filament on this Tape

This Rectangle Piece of Painters Tape will cover the Dremel’s 3D Printer Print Bed with one single piece.

Perfect 1 piece application!

Nearly all filament types (ie PLA) will stick to this tape, but come off with relative ease after printing is completed.

This tape removes cleanly without adhesive transfer or surface damage for up to 14 days, even in direct sunlight.
It is a medium adhesion tape that is ideal for painted walls and trim, woodwork, glass and metal.

Dremel Includes only a Few Sheets in the original Factory Printer Box, they do not sell extra Sheets.
The Only Place to get more of the same Blue Tape Sheets is right here on this Page.
Blue Tape Sheets made by 3M are the only recommended way to print on the original Acrylic Print Bed, or the Upgraded Glass Plates (that you can get on Amazon too).

Instructions:

Step 1. Clean the Printing Bed Off with some Rubbing Alcohol.
Step 2. Remove the Tape Sheet from its Backing and apply to the Surface of the Printing Bed.
Step 3. Clean the Taped surface off with some Rubbing Alcohol.
Step 4. Make Sure that if you haven’t leveled the print bed with the tape on it, that you go through the leveling procedure to adjust for the extra thickness of the tape.
Step 5. After Printing make sure to carefully remove the printed piece from the tape with a thin spatula.
Step 6. After Each Print clean the Tape Off with some Rubbing Alcohol.

Each Sheet of Tape should last for many prints, depending on the type/size of prints you do.
To make it last longer, try printing on different sections of the tape bed to get the most from it.

This is High Quality 3M 2090 Scotchblue Tape Made in the USA.
It can’t be found anywhere else so Buy Now

Product Features

  • 6in x 9.25in Tape – 10 Sheets – To be Used on the Dremel 3D Printer Build Plate when printing
  • Perfect Tape to use for any 3D Printer that Prints with PLA Filament
  • Prints come off cleanly with no lines on the bottom from multiple pieces of tape.
  • Applies to the surface cleanly, and easily with easy re position just lift off and reapply.
  • Perfectly sized for the Dremel 3D Printer Build Plate

Click Here For More Information

Sprite Science™ 12 Pack Painters Tape 30cm x 18.5cm Blue Square Sheets for 3D Printer

This Rectangle Piece of Painters Tape will cover most (if not all) 3D Printer Print Beds with one single piece.

Perfect for easy application to your print bed, no need to try and line up multiple pieces of 2 or 3 in painters tape.

Provides easy release of printed parts as they cool.

Package:

12pack x 30cm x 18cm Tape Square

Product Features

  • 12 Pack 30cm x 18cm Tape Square with release liner
  • Perfect Tape for easy application to your 3D printer’s build plate
  • Prints come off cleanly with no lines on the bottom from multiple pieces of tape.
  • Applies to the surface cleanly, and easily with easy re position just lift off and reapply.
  • Just like the tape that comes packaged with a Replicator 2 to be used on the Printer Plate

Click Here If You Need More Detailed Info…

TapeCase 3M 2090 8.25 and 34″ x 10.5 and 34″ -100 3D Printer Sheets, 8.25 and 34″ x 10.5 and 34″ (Pack of 100)

3D printer sheets are made from precision cut rectangular sheets of 3M ScotchBlue 2090. Intended for application onto 3D printer bed plates, this product offers industrial class quality and reliability. These sheets apply easily and remove cleanly without adhesive residue for up to 14 days after the original application.

Product Features

  • For use with 3D printer bed plates
  • Convenient one piece construction
  • Functions at a maximum of 200° F (93° C) for up to 30 minutes
  • Easy handling and application
  • Clean and easy removal for up to 14 days

Detailed Information available on our Homepage…

10 Pack: 8″ x 8″ x 2mil 3DXTech Polyimide Tape Sheets Kapton for 3D Printer Platforms

3DXTech Polyimide Tape Sheets: 10 Pack of 2mil sheets of 3DXTech Polyimide Tape offers an excellent print surface for 3D Printer Platforms. The polyimide tape is 2mil thick (0.05mm) with Silicone Adhesive and a PET release liner. This tape provides a smooth heat-resistant surface that easily removes once you have finished your print. Polyimide Tape offers excellent electrical insulation, high temperature resistance, and high voltage resistance. Suitable for use on Makerbot Replicator, Ultimaker, Prinrbot, Reprap, Mendel, Prusa, Up! Printers, Solidoodle as well as most other 3D Printers.

Product Features

  • Polyimide Substrate: 2mil (.002″)
  • Length: 8″
  • Width: 8″
  • Temp Range: up to 250C

Detailed Information available on our Homepage…