PLA Gold Filament 1.75mm, 1kg / 2.2lb Printing Material Supply Spool for 3D Printer

These 3D Filament roll in a spool wheel comes in many various colors and in different materials (ie such as ABS or PLA, etc). This is a durable material designed for strong, resilient parts. When printed, this 1.75 mm high temperature filament diameter will look good and have slightly more texture than standard filament.

PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Unlike ABS, PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.

Compatible with Flashforge, RepRap, Makerbot, UP!, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC, and more!

Product Features

  • Diameter of the filament: 1.75mm; Weight of the Filament spool: 1KG/2.2lbs
  • Printing at user control melting temperature at between 160 – 180 C
  • Easy to use and performs well on most prints
  • High Product Precision: Filament extrudes precisely for excellent printing and consistent layering.
  • Spool of the Filament are in a sealed package

Check Out Our Website For Details…

Voltivo ExcelFil Ash Grey PLA 1.75mm 3D Printing Filament (1kg/2.2lbs spool)

Voltivo ExcelFil is a high grade, high density 3D printing filament available in both PLA and ABS perfectly suited for and tested with a wide range of 3D printers. It allows for easy extrusion due to its tight laser-controlled tolerances, smooth flow characteristics over a large temperature range, rapid cooling and a high tensile strenght.

ExcelFil comes in a large range of colors and in two diameters to fit most printers available. We ship ExcelFil on sturdy recycleable spools, vacuum sealed with a desiccant bag to ensure it arrives moisture free. Unlike other vendors, we provide full support information on our filaments on our ExcelFil Support Site.

Filament characterization

We in average spend 2 weeks to test and characterize each new material, diameter and color combination in many different semi-automated tests. Above and beyond the manufacturing quality control, we re-run these tests on a quarterly basis to ensure we always ship a product that provides reliable and repeatable print results while using ExcelFil

Filament Print Support Database

Creating successful prints greatly depends on the correct print settings. 3D printing still unfortunately is not as straight forward as desktop printing. The combination of material, the color, the 3D model, the slicing software and the printer hardware used all greatly influence successful print results. Based on the characterisation tests outlined above, we make available a great amount of information for specific use cases providing the user with a great starting point. Each spool is labeled with a QRCode which provides direct access to the specific ExcelFil support database entry and we provide a smartphone ready website for quick lookup as well.

Product Features

  • Diameter and Roundness accuracy better than 0.05 mm
  • Fully opaque color with a shiny finish, no shortcuts taken on adding non-toxic color pigments
  • Only certified raw materials from USA and German suppliers, no scrap or recycle material
  • Formulated for low printing temperature for less blobbing and stringing
  • Strong layer bonds and very rigid when cooled

Check Out Our Website For Details…

PLA Silver Filament 1.75mm, 1kg / 2.2lb Printing Material Supply Spool for 3D Printer

These 3D Filament roll in a spool wheel comes in many various colors and in different materials (ie such as ABS or PLA, etc). This is a durable material designed for strong, resilient parts. When printed, this 1.75 mm high temperature filament diameter will look good and have slightly more texture than standard filament.

PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Unlike ABS, PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.

Compatible with Flashforge, RepRap, Makerbot, UP!, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC, and more!

Product Features

  • Diameter of the filament: 1.75mm; Weight of the Filament spool: 1KG/2.2lbs
  • Printing at user control melting temperature at between 160 – 180 C
  • Easy to use and performs well on most prints
  • High Product Precision: Filament extrudes precisely for excellent printing and consistent layering.
  • Spool of the Filament are in a sealed package

Check Out Our Website For Details…

HATCHBOX 1.75mm Green PLA 3D Printer Filament – 1kg Spool (2.2 lbs) – Dimensional Accuracy +/- 0.05mm

Welcome to Hatchbox 3D Printer Filament

Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.
The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm.

Frequently Asked Questions

1) Filament not extruding properly?
A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Won’t the print stick to the build platform?
A: First, review FAQ #1. Second, for PLA it’s recommended to use blue painters tape and ABS it’s recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use “*ABS Sludge” a little goes a long way. You can use this on the build platform on top of kapton tape.

*When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy.

Product Features

  • 1 KG (approximately 2.20 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
  • Recommended Extrusion/Nozzle Temperature 180°C – 210°C (356°F – 410°F)
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 1.50″

Check Out Our Website For Details…