[Sintron] 3D Printer Controller Kit RAMPS 1.4 + Mega 2560 R3 + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter For Arduino RepRap

Overview

(1) 3D Printer Controller RAMPS 1.4

It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion.

for more informations, you can check here : http://www.amazon.com/gp/product/B00JU41GQ4

(2) Mega 2560 R3

for more informations, you can check here : http://www.amazon.com/gp/product/B00E94CGTQ

(3) A4988 Stepper Motor Driver

A4988 is a complete microstepping motor driver with built-in translator for easy operation

for more informations, you can check here : http://www.amazon.com/gp/product/B00JXGT1G6

(4) LCD 12864 Graphic Smart Display Controller

This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the “smart adapter” included.

for more informations, you can check here : http://www.amazon.com/gp/product/B00L72FAZU

Package List

(1) RAMPS 1.4 x 1

(2) Mega 2560 R3 x 1

(3) A4988 Stepper Motor Driver with Heatsink x 5

(4) LCD 12864 Graphic Smart Display Controller x 1

(5) Smart Adapter x 1

(6) 30cm Cable x 2

(7) USB Cable x 1

(8) Storage Box x 1

Here is the firmware for you to use with Ramps 1.4 https://www.dropbox.com/s/56qbizg7l56k2lw/Marlin-Marlin_v1%20for%20lcd%2012864.zip Marlin for ramps 1.4 + A4988 stepper driver + LCD 12864 controller

Product Features

  • (1) 3D Printer Controller RAMPS 1.4 x 1
  • (2) Arduino-Compatible Mega 2560 R3 With USB Cable x 1
  • (3) A4988 Stepper Motor Driver With Heatsink x 5
  • (4) LCD 12864 Graphic Smart Display Controller Kit x 1
  • (5) Storage Box x 1

Click Here If You Need More Detailed Info…

5PCS Nema 17 Stepper Motor Bipolar 2A 84oz.in 48mm 4-lead for 3D Printer/CNC

This is high torque Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution).

Each phase draws 2A, allowing for a holding torque of 59Ncm(83.6oz.in). It’s very good choice for 3D printer.

Electrical Specification:

* Manufacturer Part Number: 17HS19-2004S

* Motor Type: Bipolar Stepper

* Step Angle: 1.8 deg.

* Holding Torque: 59Ncm(83.6oz.in)

* Rated Current/phase: 2.0A

* Phase Resistance: 1.4ohms

* Inductance: 3.0mH+/-20%(1KHz)

Physical Specification:

* Frame Size: 42 x 42mm

* Body Length: 47mm

* Shaft Diameter: 5mm

* Shaft Length: 19.5mm

* D-cut Length: 19.5mm

* Number of Leads: 4

* Lead Length: 225mm

* Weight: 390g

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.

Connecting the motor directly to a power supply will destroy the motor.

Product Features

  • 5pcs/ Package
  • 59Ncm(83.6oz.in) holding torque
  • NEMA 17 bipolar 1.65″x1.65″x1.85″ 4-wire
  • 1.8 deg. step angle(200 steps/rev)
  • Rated current 2.0A & resistance 1.4ohms

Visit The Website For More Information…

Sunwin 3d Printer Parts Trprap Makerbot DIY Mk8 Direct Drive Extruder Kit Stepper Motor

Hybrid Stepper Motor Specifications:

Weight: 0.6kg

Step angle:1.8±5%

Phase No.: 2

Insulation resistance: 100MOhm(500V DC)

Insulation class: B

Voltage: 3.6v

Current: 1.5A

Inductance: 6.0±20%mH

Resistance: 2.4 ± 10%Ω

Holding torque: 7.0kg.cm

What is in box ?

1 x 3D Printer Parts Trprap Makerbot DIY MK8 Direct Drive Extruder kit/set With Stepper Motor For Extruder with 700mm Tube

Product Features

  • Step angle:1.8±5%
  • Phase No.: 2
  • Insulation resistance: 100MOhm(500V DC)
  • Insulation class: B
  • Voltage: 3.6v

Click Here If You Need More Detailed Info…

SoaringE Assembled Extruder Gt1 with Stepper Motor Nema17 Reprap 3d Printer

Discription:

It’s a huge leap forward for personal manufacturing- you will be amazed by the improvement in your print quality, and the reliability of use obtained with the Getech extruder GT1.

Designed from scratch, Getechextruder GT1 contains a number of newly created custom manufactured parts. The GT1 redesign rolls in all the innovations and user experience from the previous Plus into one cutting edge, pint size device! The Getechextruder GT1 is compatible for use with Prusa Mendel i2 Printer.

Package Includes:

1 x assembled Geeetech extruder GT1

Product Features

  • Smaller format, lighter, more gumption
  • The shortest build time of any of our extruders.
  • It is still fully modular, and any component can be replaced or worked on without replacing the entire unit
  • Designed from scratch, Getechextruder GT2 contains a number of newly created custom manufactured parts
  • High quality with brand new

Visit The Website For More Information…