Prototype Supply 3mm PLA Blue 3D Printing Filament, 1kg (2.2 pounds)

Prototype Supply C1 series 3D printing filament – for demanding FDM applications

3D Printer operators looking for high-quality printed objects with better dimensional control, excellent layer adhesion, and a wide selection of colors are using Prototype Supply C1 3D printing filament.

Prototype Supply C1 filament is made especially for the needs of professional-quality 3D printing:

  • Manufactured specifically for use with 3D printers, not industrial plastic welding
  • High dimensional stability for improved accuracy.
  • Excellent melt and adhesion properties.
  • Wide spool diameter for straighter filament.
  • Greater selection of colors to choose from.

PLA 3.00mm
Compatible with:

  • Makerbot Thing-o-Matic w/ Mk6 Stepstruder, CupCake
  • Ultimaker, Ultimaker 2
  • Other printers with 3 mm compatible extruders and hot-ends

Also compatible with 3Doodler 3D pen.

Product Features

  • 3D Printing Filament, Plastic, PLA, 3.00 mm diameter, 1.0 kg (Net Weight). Blue (Clear)
  • High quality filament manufactured specifically for professional quality 3D printing.
  • Wide-core spool reduces extrusion difficulty caused by tightly coiled filament. 53-mm (2.1 inch) diameter mounting hole.
  • For Ultimaker, Ultimaker 2, Deezmaker Bukobot, MendelMax and other printers that accept 3.00 mm filament.
  • Recommended for printers without a heated print bed.

Check Out Our Website For Details…

Soft Digits® 12v 30a Dc Regulated Switching Power Supply 360w for Cctv,3d Printer,radio,commercial Lighting,home Lighting,ktv Club

Applications

 

Office lighting, Artwork lighting, Display case

Home lighting, Hotel, Restaurant lighting and so on

 

Commercial lighting, such as Down light, Underground lamp, Panel light, Spotlight, Wall washer, etc.

 

Other public lighting…

Important Parameter

 

Store Temperature: -25~75°C

 

Working Temperature: -25~50°C

 

Work environment: Indoor or outdoor installations

 

Waterproof Rating: IP20

Product Features

  • 100% full load burn-in test,Approved by CE, RoHS, FCC
  • With stable input and output ripple
  • All using long life electrolytic capacitors
  • All spare parts are new and checked by QC,Withstand 290VAC surge input for 5 seconds
  • High efficiency to 90%, long life and High reliability  Withstanding High voltage and operating temperature

Visit The Website For More Information…

BuMat ABS 1.75mm, 1kg, 2.2lb White Filament Printing Material Supply Spool for 3D Printer ABSWH

BuMat Filament is the best, safest, and most consistent filament for your 3D Printer. This is the highest quality components for producing successful 3D print. It is compatible with all 1.75mm Printer like Flash Forge USA, RepRap, Rapman, Makerbot, BFB 3000, Rostock, Ultimaker Printrbot, Makibox, Buccaneer, Kossel, Mendel and many other printers.

Product Features

  • 1.75mm ABS at 2.2 lb. (1KG)
  • User defined melting temperature at between 190 – 220 C
  • Diameter of the filament: 1.75mm
  • Easy to use and performs well on most prints
  • Air Tight Sealed in a plastic bag

Check Out Our Website For Details…

PLA Gray Filament 1.75mm, 1kg / 2.2lb Printing Material Supply Spool for 3D Printer

These 3D Filament roll in a spool wheel comes in many various colors and in different materials (ie such as ABS or PLA, etc). This is a durable material designed for strong, resilient parts. When printed, this 1.75 mm high temperature filament diameter will look good and have slightly more texture than standard filament.

PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Unlike ABS, PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.

Compatible with Flashforge, RepRap, Makerbot, UP!, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC, and more!

Product Features

  • Diameter of the filament: 1.75mm; Weight of the Filament spool: 1KG/2.2lbs
  • Printing at user control melting temperature at between 160 – 180 C
  • Easy to use and performs well on most prints
  • High Product Precision: Filament extrudes precisely for excellent printing and consistent layering.
  • Spool of the Filament are in a sealed package

Check Out Our Website For Details…