SainSmart 3D Printing Kit with RAMPS 1.4 + SD Card Breakout + A4988 Driver + 2004LCD with Controller + MEGA2560 R3 + Mechanical Endstop + Heatbed + Thermistor + 0.5mm Nozzle + Cooler Fan for Arduino

Smart Controller contains a SD-Card reader, an rotary encoder and a 20 Character
x 4 Line LCD display. You can easy connect it to your Ramps board. After
connecting this panel to your Ramps you don’t need your pc any more, the Smart
Controller supplies power for your SD card. Further more all actions like
calibration, axes movements can be done by just using the rotary encoder on the
Smart Controller. Print your 3D designs without PC, just with a g-code design
stored on the SD card.

SainSmart Mechanical Endstop perfect for any 3D printer also for use on CNC
machines and other electronic applications.

SainSmart SD Ramps: Breakout board for the microSD socket that is not much
bigger than your fingernail. Compatible with the SPI interface found on any SD
card, this tiny form factor was created for cell phone storage and is perfect
for your next 3D printer project! Board comes fully assembled and tested.The
bare socket is available.

SainSmart Heatbed MK2,Borosilicate Glass, Aluminium Bed Mount Plate is the
latest and the best type of heatbed money can buy as of today. 100% compatible
with all Prusa and Mendel 3d printer variants. (We will provide you another two
100K ohm thermistor as a gift.

Package Content:

1 x RAMPS 1.4
1 x Mega 2560 R3
5 x A4988 driver
1 x LCD2004 With Controller
1 x SD card breakout For ramps
2 x Cooler Fan for 3D ramps
6 x Mechanical Endstop with cable
1 x RAMPS 1.4 wiring cable
1 x Heatbed MK2b
2 x thermistor For headbed(100K ohm)
1 x Borosilicate Glass
1 x Aluminium Bed Mount Plate
5 x NEMA 17 Stepper Motors
1 x Assembled J-head Hotend Nozzle.
5 x GT2 20T Aluminum Pulley
1 x GT2 Timing Belt
1 x USB Cable

Note: If you need any technical support of instructions, please contact our customer service.

Product Features

  • Sainsmart A4988 driver is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu; we therefore recommend careful reading of the A4988 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil. We will provide you additional heat sink for you as a gift.
  • Sainsmart Mega2560 R3 is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. Arduino development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works.
  • Sainsmart RAMPS 1.4 is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces a Mega with the powerful MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on a MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. This board is mostly based on Adrian’s Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by Vik. Also inspired by Vik’s work with EasyDrivers. circuit design based mostly on Adrian’s Pololu_Electronics Joaz at RepRapSource.com supplied initial pin definitions and many design improvements. Much inspiration, suggestions, and ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap community.

Visit The Website For More Information…

FbscTech 10Pcs 100K OHM NTC Thermistor Resistor NTC-100K for Temperature Sensor MK2a 3D Printer

FbscTech 10Pcs 100K OHM NTC Thermistor Resistor NTC-100K for Temperature Sensor MK2a 3D Printer

Description:
DESCRIPTION Of  NTC thermal thermistor

1. NTC thermistor for temperature sensor is one where the thermistor chip is welded with leads by alloy soldering process, then partially treated by glass sealing .
2. The element has a bead form with good stability, small size and rapid response
3. Widely used in temperature sensors,electronic thermometers and eternity calendar, temperature compensation,various kinds of household appliances as well as Industrial, medical, environmental protection, weather and food processing equipment etc.

Features of NTC  NTC thermal thermistor: 100K

1. Agency recognition:UL/ RoHS
2. Fastest response time and high accuracy
3. Better Stability ,as chip is welded with leads by alloy soldering process
4. High resistance and mechanical strength
5. Small size, lightweight and cheap
6. Mass production for high accurate element
7. Operation temperature range: -50 to +260 degrees Celsius
8. Thermal time constant: less than 5s (In still air)
9. Usable in high-temperature and high-moisture environments

APPLICATIONS OF NTC thermal Thermistor 100K

1 Temperature sensors
2  Electronic thermometers and eternity calendar
3  Temperature compensation
4  Household appliances ( air conditioners, microwave ovens, electric fans, electric heaters)
5  Industrial, medical, environmental protection, weather and food processing equipment
6  Apparatus coils, integrated circuits, quartz crystal oscillators and thermocouples.
7  Medical instrument
8  Others

Packing List:
10x NTC Thermistor
Warm Tips: Please check both the model and picture before placing order.

Product Features

  • Fastest response time and high accuracy
  • Better Stability ,as chip is welded with leads by alloy soldering process
  • High resistance and mechanical strength
  • Operation temperature range: -50 to +260 degrees Celsius

Visit The Website For More Information…

J-head/e3d Printer Head Extruder 12v 0.4mm Thermistor Single Nozzles 1.75mm Filaments 3d Printer Head 3DA-002

Nozzle diameter: 0.4mm (0.3optional)

Print Material: 1.75mm(3mm optional)

Hot temp:thermistor

Extrusion head voltage 12V, power 40W

Product Features

  • Material:Metal
  • Total length:89mm
  • Nozzle:0.4mm
  • For filaments:3.0/1.75mm PLA ABS
  • 100% high quality and good price,meet your needs perfectly.

Detailed Information available on our Homepage…

0.4mm Nozzle Metal J-Head Metal 100K Thermistor Extruder 24V 1.75mm Tube Fan for 3D Printer

Weight: about 62g
For DIY remote and RepRap open source machine

Product Features

  • Extrusion head heating voltage:24V
  • Nozzle: 0.4mm 100K Thermistor Nozzle
  • Maximum speeds: 250mm / s
  • With Cooling fan, With PTFE tubing about 700mm
  • Compatible with 1.75mm filament

Visit The Website For More Information…