IC3D 120mm (4.7″) Wide 10M Long Kapton (Polyimide) Tape for 3D Printer platforms

This is a 120mm (4.7″) wide by 22M long roll of Kapton tape (Polyimide). Enough to cover about 50 8×8″ glass sheets. We prefer this size since it’s easier to apply than full width sheets. Printing over heated Kapton taped glass allows for excellent adhesion of melted plastic and gives the bottom of your print a nice smooth finish. After many hours of printing, refresh your printing surface with this stuff. This tape can handle temperatures of up to about 280C. We’ve tested tape from several different manufacturers and chose the best. *** APPLICATION TIP: To minimize the seam from laying to sides down, just spray some lightly soaped water onto the glass and tape. Lay the first side down, slide to position, then squeegee the water out.

Price:

Read More

5 Meters GT2 2mm pitch 6mm wide Timing Belt for 3D printer CNC

Package included:
5 Meters GT2 Timing Belt

Timing belts: GT2
Pitch :2mm
Width:6mm
Shape:open belt

If order multiple quantities will be shipped in one continuous length.

Product Features

  • 5 Meters GT2 Timing Belt
  • Shipped from Shanghai China & Fast delivery: 6-12 days

Detailed Information available on our Homepage…

Extra Large 3D Printer Platform Tape Roll [7.25 inch wide x 65.5 feet long] – 3DXTech Blue Painters Tape is an excellent value and covers practically all 3D Printer platforms. Equivilent to 65 sheets at a fraction of the cost.

Extra Large 3D Printer platform tape roll. Your PLA prints will stick to this blue painters tape that is wide enough to fit practically every printer and long enough to last for months. 7.25″ wide x 65.5 feet long on a sturdy cardboard core. This will adhere to your build platform without leaving a sticky residue. Excellent value and incredibly useful. Suitable for use on Makerbot Replicator, Ultimaker, Prinrbot, Reprap, Mendel, Prusa, Up! Printers, Solidoodle as well as most other 3D Printers.

Product Features

  • Excellent value vs. Sheets
  • Excellent print surface for PLA
  • Adheres to printer plate with no seams
  • 7.25″ wide (18.4cm)
  • 65.5 feet long (20m)

Detailed Information available on our Homepage…

IC3D 120mm (4.7″) Wide 22M Long Kapton (Polyimide) Tape

This is a 120mm (4.7″) wide by 22M long roll of Kapton tape (Polyimide). Enough to cover about 50 8×8″ glass sheets. We prefer this size since it’s easier to apply than full width sheets. Printing over heated Kapton taped glass allows for excellent adhesion of melted plastic and gives the bottom of your print a nice smooth finish. After many hours of printing, refresh your printing surface with this stuff. This tape can handle temperatures of up to about 280C. We’ve tested tape from several different manufacturers and chose the best. *** APPLICATION TIP: To minimize the seam from laying to sides down, just spray some lightly soaped water onto the glass and tape. Lay the first side down, slide to position, then squeegee the water out. Respray the second side if necessary, lay down the tape, slide to position to butt up against the first side, slowly squeegee out water. Let dry and trim off the sides. ***

Product Features

  • Provides excellent bed adhesion for 3D printing with ABS and PLA.
  • Enough to tape your 8″x8″ glass sheet about 50 times. Easier application than a single 8″ wide sheet.
  • For best taping results, try spraying lightly soaped water onto the glass and tape. Adjust position and squeegee out water. Let dry.
  • For best adhesion, set bed temp to 110C for ABS and 60C for PLA. Cool down halfway before removing part.
  • Can handle temperatures of up to about 280C.

Detailed Information available on our Homepage…