XYZprinting ABS Plastic Filament Cartridge, 1.75 mm Diameter, 600g, Yellow

The XYZPrinting ABS filament is a 600g cartridge of 1.75-mm diameter yellow filament for use with the XYZPrinting daVinci 1.0 3D printer (sold separately). Acrylonitrile butadiene styrene (ABS) is a strong thermoplastic that can be surface treated with sandpaper or acetone after printing. It is commonly used with a heated bed set to around 80 degrees C (176 degrees F) to prevent warping during the printing process and facilitate removal. The print temperature ranges from 215 to 250 degrees C (419 to 482 degrees F).

XYZprinting manufactures 3D printers. Founded in 2013, this international company has its US headquarters in San Diego, CA.

Price:$28.00

Read More

3D Printing News: Meet XYZprinting, a Serious 3D Printing Player

In the following video, from November’s EuroMold conference, 3D printing specialist Steve Heller interviews Gary Shy, marketing director at XYZprinting, an up-and-coming 3D printing company backed by Taiwanese manufacturing giant New Kinpo Group. XYZ’s approach to the 3D printing industry involves leveraging New Kinpo’s manufacturing scale, expertise, and resources to build 3D printing products that offer compelling value propositions in the marketplace. In other words, XYZ has high ambitions of becoming a 3D printing leader.   

Consequently, its products are often difficult for competitors to match in terms of features offered for the price. For instance, XYZ’s da Vinci 1.0 AiO 3D printer offers the ability to scan and 3D print objects in the same device for $799, an unheard-of price point and feature set in comparable consumer-oriented 3D printers from 3D Systems and Stratasys

A full transcript follows the video.

Apple Watch revealed: The real winner is inside
Apple recently revealed the product of its secret-development “dream team” — Apple Watch. The secret is out, and some early viewers are claiming its everyday impact could trump the iPod, iPhone, and the iPad. In fact, ABI Research predicts 485 million of this type of device will be sold per year. But one small company makes Apple’s gadget possible.And its stock price could have nearly unlimited room to run for early, in-the-know investors. To be one of them, and see where the opportunity for real money is to be made, just click here!

[youtube http://www.youtube.com/watch?v=a_uXhg1N7VQ?fs=1&hd=1&feature=oembed]

Steve Heller: Steve Heller here, folks. I’m joined today with Gary Shu of XYZprinting. He’s the marketing director.

XYZ is a very interesting company in this space. They’re backed by New Kinpo Group, a Taiwanese manufacturing giant, have a lot of manufacturing expertise, they’ve got economies of scale, they offer products much cheaper than the competition: MakerBot included, 3D Systems Cube included, Stratasys included.

Gary, I wanted to talk to you today; we’re at EuroMold. What are you showing off today at EuroMold? What are some of the most exciting things you’ve seen as well?

Gary Shu: Thanks, Steve. Actually, there’s a really good chance at EuroMold to meet European markets, and at these really professional trade shows to demonstrate our products.

I think other than the existing products being exposed to the market, of course recently we started shipping our… also making global announcement of a 3D scanning device — the very first printer in the market that you can scan and print at the same time, together in one machine.

The da Vinci 1.0 AiO is one of the main focuses for the show. You do a scan, and then print out. That’s the original, that’s the duplication. You can see interesting [unclear].

On the other hand, I think we are here to give the market a focus of our next year’s upcoming product lines. Of course, maybe at the EuroMold, if we do have a chance to go to CES [the Consumer Electronics Show] you see more of our product lines in CES.

For instance, at CES we’re going to reveal our very first non-FDM [fused deposition modeling] technology printers, next year [2015], that can print out… this is actually printed out from our prototype, our new SLA [stereolithography] type of machine.

Other than SLA machines, next year [2015] we’re going to have a totally new generation of FDM machine, and also new solutions and the first reveal of industrial-level 3D printers.

That’s just showing that XYZprinting is not just [about] having a good price and good products, but we also have multiple technologies. We have a high-end industrialized printer, we have high-quality desktop printers — we have something even cheaper to be announced next year, so that’s a wide variety of products to show from XYZprinting.

That’s what we hope, that we can be one of the most spread around [diverse] technology companies in the 3D printing industry.

Heller: Let’s talk a little bit more about price points, here. In terms of CES, it sounds like it’s going to be your big reveal for your new upcoming products. In terms of this SLA printer, what is your target price, compared to the competition in the sub-$5,000 market of these devices?

Shu: Of course, we haven’t really yet decided a final street price, a target price, for the product yet. But I think for our current targets, as the market might know, the strength of XYZ or New Kinpo Group is that we are really good in manufacturing and supply chain management.

We are targeting for the new SLA machine to be somewhere around half of the existing market price, or even lower. We don’t know yet. We haven’t really finalized our price yet, but we have confidence that we can achieve something around half of the market standard, but with more features and better quality.

Heller: With a lower price, better quality, more features, obviously you’re trying to move more units. Can you give me any sort of insight of what sort of unit growth you’re targeting internally, and where you want to be, say by the end of 2016? Going forward, where do you see this market going and evolving?

Shu: Yes, of course. Next year [2015] I think is going to be a really big year for us because we have so many new products coming out. Based on our success in the first year, next year we hope we can [have] at least three to four, if not five times more quantity shipped than this year. That’s what we believe at least, or that’s what we’re targeting.

In three years’ time, our CEO used to give a really big target of 1 million units combined, in three years’ time. I think we are still standing by that target, even though that’s not an easy target to reach. But I think we’re still confident and staying optimistic about reaching that target in three years’ time.

Heller: The market is obviously going to, in your opinion, hit an inflection point in terms of mass adoption to hit that point [level of unit growth], is that correct?

Shu: That’s right. That’s right. Our vision is that everyone eventually will use 3D printing or have [benefit from] 3D printing products. The first step that XYZ can offer is to lower down the price, to higher up [improve] the usability and quality of products.

We’re standing by that kind of a strategy, trying to expand the applications, to expand the usability, approachability of 3D printing by lowering down the price, by making more people be able to approach and to use the products. That’s still our strategy.

USA Gear 3D Printing Filament , 3D Scanners , Supply Organizer and Carrying Bag with Adjustable Interior Compartments and Accessory Pockets – Works with XYZprinting ABS , Filament Outlet Black PLA , 3D Pen ABS , HATCHBOX and Octave and many others!

USA Gear Travel Ready 3D Printing Accessory Bag

Protective Design
This USA GEAR premium quality carrying case is made to protect and organize all your 3D Printing supplies. The bag’s FlexWall organization feature is an adjustable and removable system that can be reconfigured for the storage and transportation of your Filaments , Parts , Motors , Scanners , Books , Cables and many more! It also comes equipped with an internal mesh pocket for storing your Tool Kits , Power Cables , Small Devices , Flash-Drives etc. You can keep smaller accessories safe in the outer zipper pocket too! The soft, scratch-resistant interior lining protects your 3D Printing supplies from everyday wear and tear.

Portable Features
This compact and lightweight bag is perfect for bringing your gear with you on-the-go! It comes with an adjustable, removable shoulder strap for travel and also features a carrying handle for a secure grip. Keep convenience in mind when you’re ready to show your friends the exciting new world of 3D Printing!

Quality Construction
This travel bag is constructed from weather-resistant base and RipStop Nylon. It also has a heavy-duty padded exterior shell to ensure your tablet is safe from impacts!

Organize and Protect your…
3D Scanners / 3D Printing Filament / Ingredients / Kapton Tape / Replicators / Tool Kits / Bearings / Brass Nozzles / Platforms / Timing Belt / Build Surfaces / Insulation / Motors / Mounts / Racks / ABS Packs / Cleaning Tools / Lights and many more!

Product Features

  • Perfect bag for amateurs , professionals , hobbyists , enthusiasts , Scientists , Lab Technicians and many more!
  • Keep your 3D Printing Tools , 3D Scanners , 3D Printing Filaments and other Supplies separate with the adjustable FlexWall internal divider.
  • Thick foam padding, water-resistant bottom, RIPstop Nylon and plush scratch-proof interior will keep your 3D Printing Accessories safe and secure
  • Conveniently equipped wth a detachable shoulder strap and hand strap to take with you while on the go!
  • Internal Sleeve Pocket Dimensions – 11.5 x 8.5 x 4 inches / Also comes with 3 Year Manufacturer’s Warranty **Includes Lens Cleaning Cloth and Brush

Detailed Information available on our Homepage…

XYZprinting Da Vinci 1.0 AiO All-in-One 3D Printer (Scan/Edit/Print)

The new da Vinci 1.0 AiO is the world’s No.1 all-in-one 3D printer thatallows users to scan and print 3D objects from one machine withoutprior experience or/and 3D modeling knowledge.

Product Features

  • No. 1 All-in-One 3D printer with a built-in scanner – Tom’s Guide Best of Computex 2014 Award Winner
  • 3D Printing has never been as EASY as 1-2-3 Scan-Edit-Print
  • Speedy Scan Algorithm (less than 5 min)
  • The da Vinci AiO All-in-One 3D printer prints in two materials ABS and PLA
  • Asymmetric 2-way Laser Scan Technology to promise the best scanning result

Click Here For More Information